About to get out of the Navy soon, gotta off-load some shit to get square...
~The 60 is setup for a JK... Just needs upper control arms mounts welded... All new bearings, seals, kingpins, u-joints, has a truss which is ugly... New never run 5.38's. Diff is Open.
~FF 14bolt, LCA's and coil spring mounts tacked in place, has a custom truss that will allow for a 3-link or 4-link set-up. Disk brake conversion, New never run 5.38's, Diff is open. Asking $2000 for both axles
~ 5 Michelin XML's measure 38". 325/85/R16... A couple have been professionally patched, some scrapes etc but all hold air. Even wear not cupping etc.
Asking $800 firm.
~ 4 New never mounted 16x10 steel D-style rims with 4.25" BS. All have new valve stems installed. Center hole is 5.25"
Asking $320 firm
~ Lincoln Power MIG 216.... Comes with a pony/hip bottle and has approximately 3/4 spool. Have various welding gloves and two welding helmets.
Asking $1400 firm
~ Have various size links one end has poly bushings the other 1-1/4" heims, 2 measure 40" c to c the other 2 measure 34" c to c. Obviously they're adjustable... Have (6) 1-1/4" heims total... Links made from 2" x 1/4" DOM all stuff/material from RUFFSTUFF Also have 3/4 & 7/8 heims as well as panhard brackets for the frame and axles... Pretty sure I have extra 1.5" x .250" DOM. RuffStuff GM 1-ton y-link steering new tre's, 1.5" x .250" DOM
Ford NP205 shift fork ground for twin stick mod. Asking $100
Let me know if you're interested.... Will sell the 2wd 08 Jeep 4 door, 6 speed manual, has 65,500 miles...
Asking $16k with everything listed above.