Join Date: Jul 2013
Location: Whidbey Island, WA
Feedback: 0 reviews
Hubs sold, still have the full artec kit minus the tone rings. $100 yall!
I have a set of 2 14 bolt hubs that are already machined and have tone rings installed. Work was done by Eric @ Automotive Machine and Supply in Fort Worth. They are off of a newer ribbed 10.5 14 bolt SRW. The rings are from artec and are 52 tooth. One has a slight bit of surface rust but nothing concerning. $150 + shipping.
I also have the artec 14 bolt abs kit that has been painted black, installed, and removed. $100 + shipping
The story is I bought a set of hubs to get machined, then after all that work it turned out that my axle is some uncommon model and the hubs are not interchangeable so I had to get my original hubs machined and tone rings installed. I verified that the rings work but the bearing spacing was wrong for my axle.
Billet 2013 2 door
Dana 60 front, 14 Bolt rear, ARB's, 5.38's, 40" sticky Trepadors, 3 link front and rear, 14" Sway-a-Way coilovers, Tom Woods 1310 front, Adams 1350 rear, PSC Hydro assist
Last edited by Tweak; 10-06-2015 at 08:48 AM.