Jk Super Duty 60 Partial Swap Package!
I have a set of brand new F-450 Timken unit bearings drilled to the 8on6.5" bolt pattern and bored for 35 spline stub shafts! Uses the metric 14x1.5 wheel studs.
These perfectly match the new style disc brake 14 bolt wheel bolt pattern and studs! Making the front superduty 60 a perfect doner!
I will also be including a set of 55 tooth tone rings to add to your rear axle of choice, this allows you to retain the factory abs and traction control NO LIGHTS to annoy and irritate! ABS sensors not included however I do have part numbers for some that are compatible with the ford hubs and plug directly into the jeep with no modifications what so ever!
Here is what is included!
2- Brand new Timken 450 unit bearings re drilled to the standard 8on6.5" wheel pattern and bored for the larger 35 spline stub shafts. New needle bearings also pressed in.
2-Nitro chromoly 35spline stub shafts with hub seals pressed on.
2-55 tooth tone rings for the rear to match the ford unit bearing hubs allowing same count at all 4 wheels.
1-New set of Warn 35 spline premium hubs!
Everything is brand new! I can source and include the proper abs sensors for the front to ship with everything for an extra $120 from my local dealer. Factory sensors will be retained in the rear.
I run this same setup on my own rig and it works flawless! I have no plans for these parts in the near future and could use the cash for the holidays.
Looking to get $1000 shipped to the lower 48, extra $120 if wanting the front sensors. Please pm for contact info or questions.
Last edited by n8rb8r; 11-28-2013 at 02:41 PM.