Shaffer's Offroad JK - JKowners.com : Jeep Wrangler JK Forum
 
LinkBack Thread Tools Display Modes
post #1 of 13 Old 07-24-2007, 06:18 PM Thread Starter
 
Join Date: Mar 2007
Posts: 12
Feedback: 0 reviews
Shaffer's Offroad JK

With the addition of our Tube Fenders, Front Stinger Winch Bumper, and Tubular Rock Sliders. Then adding a Teraflex 4.5in JK Short Arm kit JE Reel 1350 CV Driveshaft's, Polished Walker Evans Wheels, and 37in BFG Krawlers it was almost complete....

We also picked up a set of Mopar Performance JK Rubicon Axles, complete lug nut to lug nut from Lithia Jeep of Reno for a Smokin Deal!


and here she is, ready for Jeepers Jamboree...


Here's the winch bumper with the new Warn 12k# winch with built in air compressor.
Attached Images
     
Dave is offline  
Sponsored Links
Advertisement
 
post #2 of 13 Old 07-24-2007, 06:22 PM Thread Starter
 
Join Date: Mar 2007
Posts: 12
Feedback: 0 reviews

a few shot's of our tube fenders
Attached Images
       
Dave is offline  
post #3 of 13 Old 07-24-2007, 06:24 PM Thread Starter
 
Join Date: Mar 2007
Posts: 12
Feedback: 0 reviews

and a few clearance shot's all flexed out...
Attached Images
       
Dave is offline  
Sponsored Links
Advertisement
 
post #4 of 13 Old 07-24-2007, 06:50 PM
Broker by the Minute
 
MichaelW's Avatar
 
Join Date: Mar 2007
Location: Cartoon City Nirvana
Posts: 3,827
Garage
Feedback: 0 reviews

Dang you guys do good work under pressure!

Looks really sweet!

Have fun on the run! Wish I was there already.

I'll swing by when everyone gets back.

Rock-on!
MichaelW is offline  
post #5 of 13 Old 07-25-2007, 06:23 AM
Broker by the Minute
 
MichaelW's Avatar
 
Join Date: Mar 2007
Location: Cartoon City Nirvana
Posts: 3,827
Garage
Feedback: 0 reviews

http://www.jeepforum.com/forum/showt...=1#post4005050

I posted a link to this thread from JeepForum so that people can see the fenders.
MichaelW is offline  
post #6 of 13 Old 07-26-2007, 12:32 PM
Granite Guru
 
Living Still's Avatar
 
Join Date: Mar 2007
Location: Reno, NV
Age: 30
Posts: 265
Feedback: 0 reviews

Nice work Mike! Good to see someone making some real tube fenders. Hope you make/sell a ton of them.

-Casey
Living Still is offline  
post #7 of 13 Old 07-29-2007, 07:21 AM
 
Join Date: Jul 2007
Posts: 10
Feedback: 0 reviews

those tube fenders are awsome. do you have a powder coat option? also please post some more pictures and describe the install on them.
marionnc is offline  
post #8 of 13 Old 07-30-2007, 03:55 PM
Administrator
 
Lance's Avatar
 
Join Date: Mar 2007
Location: Georgetown, CA
Posts: 1,016
Garage
Feedback: 1 reviews

Quote:
Originally Posted by marionnc View Post
those tube fenders are awsome. do you have a powder coat option? also please post some more pictures and describe the install on them.
Awesome; thanks, we do have a powder cat option we are just working on pricing for that right now. As for the install, it is pretty straight forward:

1) remove stock fender, and "brake away clips"
2) there is one hole that will have to be drilled, since a sleeve is used.
3) bolt up new fender, bolt to all stock mounting hole except the one that is drilled.
we are in the process of making a mount for the turn signal light right now, so it can be ran.

well pretty much all of the pics have been posted. When the camera gets back to the shop i will run out and get some closer pics of the fenders
thanks
Lance is offline  
post #9 of 13 Old 07-30-2007, 06:00 PM
 
Join Date: Jul 2007
Posts: 10
Feedback: 0 reviews

can the hole that you drill be covered with the factory fenders if you have to replace them. also, please post some pictures of the hole you drill and a straight on side view of the fenders.

thanks,
john
marionnc is offline  
post #10 of 13 Old 07-31-2007, 11:46 AM
Administrator
 
Lance's Avatar
 
Join Date: Mar 2007
Location: Georgetown, CA
Posts: 1,016
Garage
Feedback: 1 reviews

John, yes the hole you drill can be covered up by the factory fender. i will take pics of the fender from the side, and were you have to drill the holes.
Lance is offline  
post #11 of 13 Old 07-31-2007, 12:32 PM
Administrator
 
Lance's Avatar
 
Join Date: Mar 2007
Location: Georgetown, CA
Posts: 1,016
Garage
Feedback: 1 reviews

ok here are the pictures, you can see where the hole had to be drilled, and the sleeve was used:

Shot with Canon PowerShot SD500


Shot with Canon PowerShot SD500


Shot with Canon PowerShot SD500


Shot with Canon PowerShot SD500
Lance is offline  
post #12 of 13 Old 09-23-2007, 06:33 PM
Wheeler
 
Marauder's Avatar
 
Join Date: Sep 2007
Location: Chiefland fl
Posts: 74
Feedback: 0 reviews

Love the look of the tube fenders.

But i i am in love with your front bumper and i want to order one now lol.

How long of a wait do you have on it.
Marauder is offline  
post #13 of 13 Old 10-04-2007, 04:39 PM
Rock God
 
Join Date: Aug 2007
Posts: 777
Feedback: 0 reviews

wow thanks for the detailed shots, i like them a lot

hopefully my stocks ones will accidentally fall off soon so i can splurge for these
jeepik is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the JKowners.com : Jeep Wrangler JK Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome