Have an 08 JKU with a 4" Rancho Sport kit(dropped pitman arm), 37's, RS7000 Steering Stabilizer and decided to upgrade to a JKS track bar. Took off the trackbar drop bracket and stock trackbar. Measured the axle, installed the JKS trackbar, re-measured, torqued everything down and went on a test drive. Seemed to have developed some issues. The steering is VERY soft compared to the stock setup with the drop bracket, and somehow have developed bumpsteer. The steering wheel moves with acceleration, and moves over small bumps. No clue what could have caused this.. Any help would be appreciated before I take it to my guy at 4WP who runs the JKS on his jeep. Thanks everyone!