JKOwners Forum banner

14 bolt wheel backspacing

1K views 1 reply 2 participants last post by  k1973 
#1 ·
For those of you running full width axle like a 14 bolt. What backspacing did you go with?
 
#2 ·
Most that I have read run 4.5" backspacing.

I'm running full width Dana 60's front & rear and went with 4.75" backspacing on 17" Walker Evans. After installing the wheels I found out I got lucky. I have about 1/4" between the wheel and tie rod. Any more back spacing and I would have had issues.

 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top