Replacement driver side TRE - JKowners.com : Jeep Wrangler JK Forum
 
LinkBack Thread Tools Display Modes
post #1 of 8 Old 01-11-2012, 12:51 PM Thread Starter
JKO Addict!
 
rdlynch2's Avatar
 
Join Date: Jul 2011
Location: Albany NY
Age: 34
Posts: 3,175
Feedback: 1 reviews
Replacement driver side TRE

Where can I find a replacement TRE for the drivers side? What I have found so far searching are mainly for aftermarket tie rods, i am just looking to replace the stock one, preferably with a heavy duty one. Anyone know?

2008 Black 2Dr 6spd D30/44
RK 2.5 X-Factor | Synergy tie rod | 35x12.5 MTRK's | BFH front | Genright rear | Yukon 5.13's | ARB front locker | Warn M8000 w/MasterPull synthetic | Rigid 10'' E-series
rdlynch2 is offline  
Sponsored Links
Advertisement
 
post #2 of 8 Old 01-11-2012, 04:22 PM Thread Starter
JKO Addict!
 
rdlynch2's Avatar
 
Join Date: Jul 2011
Location: Albany NY
Age: 34
Posts: 3,175
Feedback: 1 reviews

bump

2008 Black 2Dr 6spd D30/44
RK 2.5 X-Factor | Synergy tie rod | 35x12.5 MTRK's | BFH front | Genright rear | Yukon 5.13's | ARB front locker | Warn M8000 w/MasterPull synthetic | Rigid 10'' E-series
rdlynch2 is offline  
post #3 of 8 Old 01-12-2012, 06:48 AM Thread Starter
JKO Addict!
 
rdlynch2's Avatar
 
Join Date: Jul 2011
Location: Albany NY
Age: 34
Posts: 3,175
Feedback: 1 reviews

Bump bump bump. Seriously, no one knows?

2008 Black 2Dr 6spd D30/44
RK 2.5 X-Factor | Synergy tie rod | 35x12.5 MTRK's | BFH front | Genright rear | Yukon 5.13's | ARB front locker | Warn M8000 w/MasterPull synthetic | Rigid 10'' E-series
rdlynch2 is offline  
Sponsored Links
Advertisement
 
post #4 of 8 Old 01-12-2012, 07:24 AM
Wheeler
 
Join Date: Oct 2010
Location: Western NY
Age: 51
Posts: 33
Feedback: 2 reviews

Somebody on another jeep site upgraded there Drag link end - MOOG part # ES3624, meant for a 1-ton Ram. Don't know if this would work but you could look into it.
Ed Shenck is offline  
post #5 of 8 Old 01-12-2012, 08:02 AM Thread Starter
JKO Addict!
 
rdlynch2's Avatar
 
Join Date: Jul 2011
Location: Albany NY
Age: 34
Posts: 3,175
Feedback: 1 reviews

Quote:
Originally Posted by Ed Shenck View Post
Somebody on another jeep site upgraded there Drag link end - MOOG part # ES3624, meant for a 1-ton Ram. Don't know if this would work but you could look into it.
By "another site" do you mean, JKF? AKA the axis of evil? Hhaha. Just messing with yah. I dont think a drag link end will work for a tie rod being that they have different configurations. Thanks though.

2008 Black 2Dr 6spd D30/44
RK 2.5 X-Factor | Synergy tie rod | 35x12.5 MTRK's | BFH front | Genright rear | Yukon 5.13's | ARB front locker | Warn M8000 w/MasterPull synthetic | Rigid 10'' E-series
rdlynch2 is offline  
post #6 of 8 Old 01-12-2012, 09:56 AM
Wheeler
 
bo9roadking's Avatar
 
Join Date: Aug 2011
Location: San Antonio, TX
Posts: 77
Garage
Feedback: 0 reviews

Have you tried the OEM part number 52060049AE? I had to buy 2 of them for my RK HD Pro Tie rod to get it installed.
bo9roadking is offline  
post #7 of 8 Old 01-12-2012, 11:07 AM
JKO Addict!
 
TCdawg's Avatar
 
Join Date: Jan 2011
Location: Woodstock, Ga
Age: 50
Posts: 3,717
Garage
Feedback: 2 reviews

Quote:
Originally Posted by Ed Shenck View Post
Somebody on another jeep site upgraded there Drag link end - MOOG part # ES3624, meant for a 1-ton Ram. Don't know if this would work but you could look into it.
This won't fit the stock tie rod if that is what the OP is looking for. It will fit the Drag link.

TC
Crawling For Reid March 23, 2019 Adventure OffRoad Park


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
TCdawg is offline  
post #8 of 8 Old 01-12-2012, 12:38 PM Thread Starter
JKO Addict!
 
rdlynch2's Avatar
 
Join Date: Jul 2011
Location: Albany NY
Age: 34
Posts: 3,175
Feedback: 1 reviews

Quote:
Originally Posted by TCdawg View Post
This won't fit the stock tie rod if that is what the OP is looking for. It will fit the Drag link.
Yes. looking for a replacement tie rod end. Not drag link

2008 Black 2Dr 6spd D30/44
RK 2.5 X-Factor | Synergy tie rod | 35x12.5 MTRK's | BFH front | Genright rear | Yukon 5.13's | ARB front locker | Warn M8000 w/MasterPull synthetic | Rigid 10'' E-series
rdlynch2 is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the JKowners.com : Jeep Wrangler JK Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome