A little off topic... buttt... are you going to Jeep Beach in May? and will you have a prototype with you?
Yes, we are going to Jeep Beach (As spectators) in May with a prototype on both of our JKs. Next year we are planning to go as Vendors, we were too late for this year's registration
Will this be coming with lockable tie down straps/bar? That's $38.00 worth of gasoline at todays prices plus the price of your can o choice, cant have them walking off.
Is it going to be painted/powder coated/or?, an option of color match paint would be a nice option but not cost effective for you, so maybe a in the raw option for those of us wanting to color match.
Aluminum or steel? Interested.
Any optional water jet/laser cutting? would not mind our spikes tactical spider cut in there somewhere.
Sorry for all the questions, this is something i was looking into having made but you nailed it.
- Regarding Lockable tie downs: We are working on a system that will lock, not only the jerry cans (with your gas in it
), but the high lift as well.
- Color: The default is black minitex powder coat, if anybody wants it, to be color matched, we can mail the piece in raw metal form. The client will be in charge of finding a local paint shop.
Note: the cost of the powder coat will be substracted (-$25).
- Aluminum or steel: For now, we have it in steel, but definitely in the future, aluminum will come. Personally, I'm big fan of weight savings.
Laser or water jet not offered at this time.
We are very flexible regarding the configuration of any of our products. What we mean by this is that anybody can remove or replace features at the time of ordering.
Not cheap, but I think that it would be worth it (IMO). Will custom logos be available on this as well? If you incorporate a license plate mount on the outside I'm in 100%.
Yes, License plate will be standard in our revised design and it will be included in the price
$220 + options? You are very proud of your design. I'm out.
Sent from an asshole with an iPhone
We are sorry you feel that way, I think you missed the part we are "designing and prototyping" and YES! we are very proud of our designs. We hope you find a product that meets your budget. Jeep Wranglers have a wide range of options, from very affordable to quite pricy.
First off, great design.....as for the above suggestions.....
Extend the antenna mount and add the plate mounts so that the License plate mounts in front of the cans.
Run the front "lip" from end to end rather than the middle being open. Attach a open plate frame so the plate can be mounted from the inside.
Sorry I used a quick editor but it should give you a basic idea of what I'm picturing.Attachment 32809
Light Tabs would be slick for rear lights
You could make like square cutouts on each side to mount some Rigids
Great sketch!....and thanks for the input. Your design won't work due to the placement and foot print of high lift. We found a way to incorporate it into the design and this will come as standart feature.