will these go together? - JKowners.com : Jeep Wrangler JK Forum
 
LinkBack Thread Tools Display Modes
post #1 of 10 Old 10-28-2010, 07:20 PM Thread Starter
JKO Addict!
 
TheBeatenPath's Avatar
 
Join Date: Aug 2009
Location: where its hot and sunny
Age: 26
Posts: 5,839
Garage
Feedback: 1 reviews
will these go together?

it looks tight im not shure it will fit what do you guys think?
http://www.overkilleng.com/product-d...orner%20Guards
http://www.quadratec.com/products/12025_513X_PG.htm


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Everyone else can BLOW themselves cause im bad as FUCK!
TheBeatenPath is offline  
Sponsored Links
Advertisement
 
post #2 of 10 Old 10-28-2010, 07:24 PM
JKO Addict!
 
SONIC's Avatar
 
Join Date: Feb 2008
Location: Bell Buckle, TN
Posts: 3,730
Feedback: 1 reviews

Chances are you'd have to do some fabbing to get it to work just right...but it hould be fairly simple unless im missing something

Yes, but there's just something about him. Something around the eyes, I don't know, reminds me of... me. No. I'm sure of it, I hate him.
-Doc Holiday
Why are you highlighting my sig? You Bastard!
SONIC is offline  
post #3 of 10 Old 10-28-2010, 07:24 PM
JKO Addict!
 
scottrock's Avatar
 
Join Date: Feb 2009
Location: St Augustine
Age: 48
Posts: 3,022
Garage
Feedback: 0 reviews

Quote:
Originally Posted by TheBeatenPath View Post
Aint much a plasma cutter & sawzall can't make fit.

Quote:
Originally Posted by StubEXrube View Post
zjr- I'm not that horny, but I have been known to salivate over your meat.
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
scottrock is offline  
Sponsored Links
Advertisement
 
post #4 of 10 Old 10-28-2010, 07:28 PM Thread Starter
JKO Addict!
 
TheBeatenPath's Avatar
 
Join Date: Aug 2009
Location: where its hot and sunny
Age: 26
Posts: 5,839
Garage
Feedback: 1 reviews

guess thats true lol.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Everyone else can BLOW themselves cause im bad as FUCK!
TheBeatenPath is offline  
post #5 of 10 Old 10-28-2010, 08:13 PM
Rock God
 
JKrazed's Avatar
 
Join Date: Dec 2007
Location: Yorba Linda, Ca
Posts: 1,333
Garage
Feedback: 13 reviews

Just install the carrier on top of the armor, it will add moer surface area for your carrier to support the weight more efficiently.

'07 2 door Rubicon Steel Blue & Black 2 Tone
PROUD to be an
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
JKrazed is offline  
post #6 of 10 Old 10-28-2010, 08:33 PM
JKO Addict!
 
Join Date: Jul 2009
Posts: 3,866
Garage
Feedback: 3 reviews

there is a way to make this work. i have talked to orfab about the aev corners and their tire carrier, but im sure its the same.

There are a few extra washers and a couple slightly longer bolts you need to pick up and its good to go. you can pm orfab about it.
BBirish is offline  
post #7 of 10 Old 10-28-2010, 08:36 PM
JKO Addict!
 
SONIC's Avatar
 
Join Date: Feb 2008
Location: Bell Buckle, TN
Posts: 3,730
Feedback: 1 reviews

TBP honestly i was expecting this:

Can i wear:


With this? :

Yes, but there's just something about him. Something around the eyes, I don't know, reminds me of... me. No. I'm sure of it, I hate him.
-Doc Holiday
Why are you highlighting my sig? You Bastard!
SONIC is offline  
post #8 of 10 Old 10-28-2010, 08:57 PM
Rock God
 
RubiRed Unlimited's Avatar
 
Join Date: Jan 2010
Location: Plainsboro, NJ
Posts: 533
Feedback: 1 reviews

Kind of a stupid question unless you cant answer it for yourself IMO. If you make me decide on how you will mod your Jeep instead of making the decision for yourself...I will paint it PINK! Get some and make a commitment.

RubiRed Unlimited

ARB bumpers
Superwinch 9.0i
3.5" AEV premium lift
35" KM2s, OR-Fab tire carrier
Viair on board air
RubiRed Unlimited is offline  
post #9 of 10 Old 10-28-2010, 09:06 PM
Granite Guru
 
MadMyk's Avatar
 
Join Date: Mar 2009
Location: Bristow, VA
Posts: 422
Garage
Feedback: 0 reviews

Quote:
Originally Posted by RubiRed Unlimited View Post
Kind of a stupid question unless you cant answer it for yourself IMO. If you make me decide on how you will mod your Jeep instead of making the decision for yourself...I will paint it PINK! Get some and make a commitment.

Just when they think they have all the answers, I go and change the question.
MadMyk is offline  
post #10 of 10 Old 10-29-2010, 06:54 AM
Rock God
 
jkx0778's Avatar
 
Join Date: Jan 2010
Age: 41
Posts: 879
Feedback: 3 reviews

I have the OR-Fab carrier. I've been looking at those corners too. It would take a little fabbing. There are spacers for the hinges. the top spacers the carrer about 3/16" away from the body. the lower is much closer. only about 1/16" to maybe 1/8".

It might be possible to weld the bracket to the corners. Can't be sure until you get them in your hands. could always cut off a little on the passenger side corner. coould also leave a portion on the corner and bent it 90* and bolt it to the bracket too.

The driver's side is "easy." just drill a 1" hole for the landing block or weld it to the corner. There is about 3/16" gap between the back of the landing pad and the sheetmetal on mine.

so many things you can do. buy them and let me know how it goes

________________


08 Unlimited: Lift, Wheels, Tires, Winch ... and an ever shrinking bank account
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
jkx0778 is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the JKowners.com : Jeep Wrangler JK Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome