Guys I am local to AZ and wanted to share my steering setup I picked up at RPMFAB located in Tempe, AZ. I was looking for something heavy duty since we have mostly large rocks here on our trails and the stock tie rod just doesn't hold up. I have had the steering for awhile now and after many trips out my jeeps still drives straight as an arrow.
I am not a tech guy but I know its made from solid 1.5'' 7075 aircraft aluminum which has some memory to it when bent so it pops back in place. Hence why you see all the race links made from this material. Additionally they take the time to hex both ends so you can easily change out TRE's with a wrench by yourself.
I know this steering is pretty popular with the local guys and they sell throughout the USA. I have not seen much here so I thought I would share my experience. They are a vendor on this site and you can always just go to their website rpmfab.com to check out the specs.
Rpm fab makes great stuff I have one of his first tie rods. I've bulldozed rocks,got hung up so bad the tierod was v shaped... No bends steering wheel is straight every time.one of the best purchase I made that works. Oh yeah its got a life time warranty.
2010 jk 2dr 3.5 in lift synergy c/arms synergy high steer RPM fab tierod Dynatrac pro rock front 5:13s cooper stt 37s eaton e locker adv adapters rubicrawler adams driveshafts bilsteins. Bestop trektop pro poisen spyder tire carrier VKS stubby rear bumper VKS fab stubby front. Pure jeep sliders yaesu ftm400. Shit I forgot the rest... KK6WIT
07 JKU, 14 bolt rear/ Teraflex 60 front, Tera Long Arm, King Coilovers, 40" MT/R-Ks, Antirock etc. 430HP LS3 engine swap. Cage and 14 bolt swap thread- To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.