I am new to the forum & this is my 1st JK – had a CJ & a TJ well built before & like all of us the first thing I wanted to do to my new jeep was add some upgrades. Also, like all of us I do my research to make sure things will work as we want them to… Sometimes we need to use a little ingenuity to make it do what we want to suit our needs. I’m not surprised that the 1st thing I did would need a little of that “wranglerneering” we all know so well. I hope this helps anybody that was/is in my situation & as I continue to build my JK I will keep up that posts to help all those out who have wondered as I did. Thank all of you for doing the same & that that have gone there before me… “Long live the free spirit and the Jeeping community”
I wanted to install my spiderweb JKini keeping the hard top on & still being able to install the screw attachments. I loosened up the screws that hold in the sound bar (10 mm socket, like many bolts on all wranglers) and fed the bungies up through the bottom – ball end to the ground (between the sound bar & metal roll bar),then through the grommets and back around the back of the sound bar & looped the bungie ball end at the back of the sound bar.
Last edited by Bodybadges; 05-13-2015 at 09:03 AM.