Join Date: Nov 2011
Location: bellflower, ca.
Feedback: 0 reviews
I wired up my 8 lights all nice and bitchen, stuck em under and protected them, ran the distribution block up into the eng compartment, ran the main power to the battery and left the master controller under the dash by the fire wall. before i finalized everything I tested the remote and figured out what each letter does wrote it down everything was fine. now the remote wont do squat. the red led on the remote comes on when u push the buttons and thats it so I replaced the battery and no dice the unit does still work at the master but its under the dash all nice and hidden, so WTF. Im thinking i need another remote or can the remote be programed? I unscrewed the 3 screws on the remote and checked out the circuit board and it looks fine.
09 rubicon 4d on 37 MTRs, 17" soft 8s,1.25 wheel spacers, 3.5 rubicon lift, synergy drag and ball joints, RIED knuckles, welded u joints,trused and gusseted housing,RUFF STUFF HD tie rod, 5.38s, outlaw diff covers, custom bumpers by me, tantrum lights, hid headlights,LED run lights,flow master short exhaust, relocated evap,and more to come...
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.