Adding stock fogs to an 07 X - JKowners.com : Jeep Wrangler JK Forum
 
LinkBack Thread Tools Display Modes
post #1 of 9 Old 12-03-2010, 06:22 AM Thread Starter
Granite Guru
 
Fazed's Avatar
 
Join Date: Aug 2010
Location: Lexington, KY
Age: 46
Posts: 146
Feedback: 0 reviews
Adding stock fogs to an 07 X

I am going to be playing around with fabbing up a different front bumper for my '07 X JKU, and want to add the factory fogs to it. Besides the lights, what will I need to get to make this work?

Thanks.

"The Red Bitch" - 2007 JK Unlimited X, Superchips, TeraFlex 1.5" leveling kit, BFG 35x12.5x18 KM2 on KMC XD Enduro wheels, home made front quick disconnects, OEM fenders chopped, front and rear OEM homemade stubby front and rear bumpers, ACE rock rails, rear facing 3rd row seat, Uniden Pro 520XL.

"Inglorious Basterd" - 1948 Willys CJ2A, AMC 304, MC2100 carb, T150/Dana 20, 33x10.5x15 Super Swampers.
Fazed is offline  
Sponsored Links
Advertisement
 
post #2 of 9 Old 12-03-2010, 06:42 AM
JKO Addict!
 
The Joker's Avatar
 
Join Date: May 2009
Location: Effin'ham County,Ga
Age: 47
Posts: 2,279
Garage
Feedback: 1 reviews

A new turn signal stalk and harness. You can get the most kit complete for about $100.
Then you have to take it to the dealer to reflash the computer to activate them.
Takes about 1 1/2 hours to install the kit. Pretty simple.
The Joker is offline  
post #3 of 9 Old 12-03-2010, 06:50 AM Thread Starter
Granite Guru
 
Fazed's Avatar
 
Join Date: Aug 2010
Location: Lexington, KY
Age: 46
Posts: 146
Feedback: 0 reviews

Quote:
Originally Posted by The Joker View Post
A new turn signal stalk and harness. You can get the most kit complete for about $100.
Then you have to take it to the dealer to reflash the computer to activate them.
Takes about 1 1/2 hours to install the kit. Pretty simple.
Besides the stealer, who sells a complete kit? Thanks.

"The Red Bitch" - 2007 JK Unlimited X, Superchips, TeraFlex 1.5" leveling kit, BFG 35x12.5x18 KM2 on KMC XD Enduro wheels, home made front quick disconnects, OEM fenders chopped, front and rear OEM homemade stubby front and rear bumpers, ACE rock rails, rear facing 3rd row seat, Uniden Pro 520XL.

"Inglorious Basterd" - 1948 Willys CJ2A, AMC 304, MC2100 carb, T150/Dana 20, 33x10.5x15 Super Swampers.
Fazed is offline  
Sponsored Links
Advertisement
 
post #4 of 9 Old 12-03-2010, 07:51 AM
Rock God
 
The Clam's Avatar
 
Join Date: Aug 2009
Location: Denver, CO
Age: 41
Posts: 1,830
Feedback: 8 reviews

Quote:
Originally Posted by Fazed View Post
Besides the stealer, who sells a complete kit? Thanks.
I added some and just tapped into the parking lights with a relay. Works great.

~ Clam
The Clam is offline  
post #5 of 9 Old 12-03-2010, 08:41 AM
JKO Addict!
 
The Joker's Avatar
 
Join Date: May 2009
Location: Effin'ham County,Ga
Age: 47
Posts: 2,279
Garage
Feedback: 1 reviews

The Mopar kit is the only one I know of.

Quote:
Originally Posted by Fazed View Post
Besides the stealer, who sells a complete kit? Thanks.
http://www.quadratec.com/products/97047_1001.htm

http://www.justforjeeps.com/prfoglakit.html
The Joker is offline  
post #6 of 9 Old 12-03-2010, 09:59 AM Thread Starter
Granite Guru
 
Fazed's Avatar
 
Join Date: Aug 2010
Location: Lexington, KY
Age: 46
Posts: 146
Feedback: 0 reviews

Quote:
Originally Posted by The Joker View Post
Awesome, joker! Thanks for the links! Just what I was looking for.

"The Red Bitch" - 2007 JK Unlimited X, Superchips, TeraFlex 1.5" leveling kit, BFG 35x12.5x18 KM2 on KMC XD Enduro wheels, home made front quick disconnects, OEM fenders chopped, front and rear OEM homemade stubby front and rear bumpers, ACE rock rails, rear facing 3rd row seat, Uniden Pro 520XL.

"Inglorious Basterd" - 1948 Willys CJ2A, AMC 304, MC2100 carb, T150/Dana 20, 33x10.5x15 Super Swampers.
Fazed is offline  
post #7 of 9 Old 12-03-2010, 03:40 PM
JKO Addict!
 
07unlimitedx's Avatar
 
Join Date: Dec 2008
Location: Calgary Alberta
Age: 49
Posts: 2,286
Garage
Feedback: 1 reviews

I think I would just get some driving lights add the relay and switch and it would probably be cheaper than doing the stock lights. Example, I have 2 Vision X Solos in the place of the factory $250 and it's all done. I've seen the stock lights @ $100, then the stealership charges $100 to re flash the computer.

Just another option.

2014 JKU, Tera44, 4.56 gears, ARB lockers, RK 3.5" flex lift, ARB front & rear bumper, dual Viair 400C w/2 gallon tank, Zeon 10S, Nitto Tires, Genesis Dual battery kit, TeraFlex tie rod & flipped drag link, ARB Intensities and TeraFlex dual rate ST sway bar.
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
07unlimitedx is offline  
post #8 of 9 Old 12-03-2010, 04:00 PM
Rock God
 
The Clam's Avatar
 
Join Date: Aug 2009
Location: Denver, CO
Age: 41
Posts: 1,830
Feedback: 8 reviews

Quote:
Originally Posted by 07unlimitedx View Post
I think I would just get some driving lights add the relay and switch and it would probably be cheaper than doing the stock lights. Example, I have 2 Vision X Solos in the place of the factory $250 and it's all done. I've seen the stock lights @ $100, then the stealership charges $100 to re flash the computer.

Just another option.
$250??

Get some fogs from a member here. I got my fogs for $30 shipped from a jko member and relay for $8 from local store and whalla, all done.

~ Clam
The Clam is offline  
post #9 of 9 Old 12-03-2010, 05:34 PM
JKO Addict!
 
The Joker's Avatar
 
Join Date: May 2009
Location: Effin'ham County,Ga
Age: 47
Posts: 2,279
Garage
Feedback: 1 reviews

I got mine flashed for 30 bucks

Sent from my DROIDX using Tapatalk
The Joker is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the JKowners.com : Jeep Wrangler JK Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome