Two times now I've gotten the error code PO369, bank 1, sensor 2.
Both times I was going about 70mph when it came up.
There are 2 camshaft sensors on the engine. Does anyone know which camshaft sensor bank 1, sensor 2 is?
It is the sensor on the back of the passenger side cylinder head, pointing almost straight up.
Not as simple as just changing it though... you need to do a"synch" or "relearn" process on a capable scanner.
Sometimes that code is a symptom of other problems also. For me it was the wiring to the sensor, and the connector.
Mine was also throwing another code that would light up the traction control light and put it in limp mode, but only part of the time.
Fixing the cam sensor fixed that also...