New to this awesome forum here looking for some advice.
about an hour ago I picked up a friend and I had my AC on and the blower motor setting set to the lowest setting. when I turned it up to high, the blower motor just stopped completely. I'm pretty new to the wrangler's and do not really know to much about them.
couple things i noticed:
-no matter what fan setting i have it on, no air comes out. the AC light, and recirculation light are still lit.
- i also noticed when i turn it on and off i can hear the compressor turn on so i dont think its a fuse issue I could be wrong.
- controls are still powered.
i have read a few other post stating that something could be melted on the back of the fan speed knob and could cause this?
i have not had a chance to take control unit out to take a look at the back yet, also i wanted to get some thoughts and opinions before i do.
hopefully you guys can point me in the right direction here.