JKOwners Forum banner

help running Rigid SRM and Flasher to SPOD

4K views 7 replies 4 participants last post by  08GumbyJKU 
#1 ·
Looking to install my Rigid SR-M reverse lights and am thinking of installing the Rigid flasher as well. First, does anyone know which flasher I'll need(3amp or 6amp)? I'm assuming I can wire this so i have one switch to turn them on solid and one switch to activate the flasher. If anyone has a wiring diagram or any assistance they can offer I'd greatly appreciate it. This will be my first electrical job, but I have two buddies willing to help who've done some amount of wiring.


http://www.baseline4x4.com/p-27729-...d-hybrid-60-degree-diffused-single-light.aspx

3 amp flasher: http://www.summitracing.com/parts/rgd-40324?seid=srese1&gclid=CIOMkpOs-7sCFcQDOgod9zcAzQ

6 amp flasher: http://www.xtralights.com/rigid-ind...dium=organic&gclid=CK_Xo-Or-7sCFUjNOgodaUQAWw
 
#2 ·
It looks like the lights only draw 0.63 amps, I'd think you could get away with the 3 amp flasher.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top