JKowners.com : Jeep Wrangler JK Forum - View Single Post - Offroad Trailer Build on 40's
View Single Post
post #9 of Old 12-31-2017, 06:26 PM Thread Starter
Keith B.
Granite Guru
 
Keith B.'s Avatar
 
Join Date: Jan 2013
Location: Mesa, AZ
Age: 43
Posts: 434

I started on the lid today.

I used another piece of 1.5 square for the base of the lid, and clamped it to the tub so it would be square.



Then I made a template for the lid rood so I could clamp the pieces to it when I welded them so it would be pretty close to the same every time.



Then I made all five cross pieces. They came out pretty good.




I also made the backing plate for the tire carrier. I used a little bigger drill bit then needed for the holes. I then bolted it to the wheel and tacked it together. This way the holes all lined up exactly.


07 JKU, 14 bolt rear/ Teraflex 60 front, Tera Long Arm, King Coilovers, 40" MT/R-Ks, Antirock etc. 430HP LS3 engine swap. Cage and 14 bolt swap thread-
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Keith B. is offline  
 
 
For the best viewing experience please update your browser to Google Chrome