JKowners.com : Jeep Wrangler JK Forum - View Single Post - Can we discuss Rare Parts Ball Joints... again
View Single Post
post #6 of Old 01-03-2017, 07:50 AM
Stangbuster
Granite Guru
 
Join Date: Jul 2011
Location: Sioux City, IA
Age: 35
Posts: 388

I have the DT ProSteers and have had great experience with them. I started with the older DT Prosteer design. I had an issue after a few years of use with the inner teflon liner crumbling and Dynatrac was TOTALLY STAND UP! They stood behind the joints and worked with me to upgrade to the newer design, even when they were out of warranty. I recommend them as a company as well as a good part mfg.
YOU GET WHAT YOU PAY FOR...

I have no experience with the RareParts Joints, but the clearance differences would worry me personally with as long as it took to dial my set up in correctly. The engineering makes complete sense and I like that the top joint mounts in from the bottom and uses threads to keep tight.

But again, no experience with the RareParts style joints here, just online reading, Im sticking with Dynatrac because of how good they are to deal with directly and my own personal experience...
Stangbuster is offline  
 
 
For the best viewing experience please update your browser to Google Chrome