JKowners.com : Jeep Wrangler JK Forum - View Single Post - Delta Tech H4 conversion housings and bulbs - Headlight Shootout 2012!
View Single Post
post #4 of Old 09-22-2012, 07:26 PM Thread Starter
Mr.RonGilbert
JKO Addict!
 
Mr.RonGilbert's Avatar
 
Join Date: Feb 2009
Location: Houston
Age: 48
Posts: 9,140
Garage

9/29 Update

First, because I forgot to mention it earlier, if you want to adjust your headlights without removing the grill you will need a "skinny" T15 driver. Vatozone sells a T15/T20 set for $4. I had the bits but my screwdriver(s) were a little too fat to get in there without forcing them in which could scratch the grill.



Some stock vs upgrade photos.

Camera settings:
Fstop = F/3.9
ISO = 1600
No Flash
0 Step
Focal Length = 5mm
Max App = 3.93

Stock:

Brights

Dims

Brights

Dims


Deltas:

Brights

Dims


Dims



Brights


Dims


A few notes about the pattern... the two "lines" that are on the right side of the pic are from the same side of each headlight, when I adjusted them they would move with each side.... weird how they are one the same side (away from oncoming traffic) - I don't know if there is a tech reason for this and you don't notice it when driving. I will take the extra light in that direction but just thought it was strange. The lamps are set up properly side to side. I used them to make sure that the lights were exact on both sides.




Last edited by Mr.RonGilbert; 10-06-2012 at 10:57 AM.
Mr.RonGilbert is offline  
 
 
For the best viewing experience please update your browser to Google Chrome