JKOwners Forum banner

Dana 44 is in

7K views 101 replies 9 participants last post by  4x4LOYR 
#1 ·
Well I spent most of the morning working on my 44. I had to replace the inner axle seal, so with help from a buddy of myne we took the carrier out and replaced it. After we got the cover bolted up and shafts in we pulled the old dana 30 out and put the 44 in:grinpimp:. now all I have to do is wate for my wire harness and wire it up, and get some 5:13's for the rear so I put my drive shaft back in.:beer:

Thanks agan Riverkid for the deal on the 44:beer:








 
See less See more
4
#56 ·
screw dave? i completely agree :thefinger:
And done! :beer:
 
#68 ·
Well then you're happy lol :grinpimp: :beer::beer:
 
#76 ·
Damn i love 35's not tooo bad with the 3:21's... for now. Good seeing you jason and thanks again for the great deal :grinpimp: :beer: :beer: :grinpimp:
p.s. nice night vision on the camera dave :thefinger:
 
#73 ·
Looks good!!!!!!!!!! Can't you boys play together nice:thefinger:
 
#96 ·
Well im almost done with the wiering ( ran out of light ). I went to pep boys and got a relay and switch, and started to wire up. It would have bin a 5 min job if I had an spod but $10 bucks at pep boys was cheaper:beer: When I finish ill do a write up on it:D











J-sack came over and worked on his bumper for a while:beer:


 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top