JKOwners Forum banner

June 3-Class Ride of the Month Contest Submission Time!

12K views 22 replies 12 participants last post by  TXROCK 
#1 · (Edited by Moderator)
Hello fellow JKO members! It's that time again to start submitting your rides for the June JKO 3-Class Rides of the Month!

So here are the guidelines/rules:

This entry/submission thread will run through 8pm on 17 June and then will start member voting from 18-24 June.....voting will end with the last post JKO timestamped on/about midnight of 24 June. Post up your Jeep pictures and DETAILS of the Jeep modifications on THIS thread so that I will have all the information for the voting threads to come!


1. Heavily Modified Class includes: 38s or larger, non-stock axle overhauls to support said tires, HEMIs, roll-cages, bumpers, winches, body cutting, etc!


2. Modified Class includes: 37s and smaller, possible regearing, bumpers, winches...the usual modifications that most daily driver offroaders put together.


3. Stock Class includes: Stock is stock....no modifications that would give you an off-road advantage over someone who did nothing to their vehicle. If it's just grab handles, a new bumper, or new meats that are the same size as stock, then that is okay. But if you are running winches, suspension upgrades, etc then you are in the modified category. Stock submissions would be based on off-roader pictures of the stock JK being used off-road.

NOTE: For stock class, ensure you put up your favorite offroad picture showing you use your Jeep justifying why you greatly need the prizes! No explanations needed as the pictures will speak for themselves! If you don't have any offroad pictures, post up whatever you have!


**NOTE: Once the submission thread is closed on 17 June, there will be no late additions.


VENDORS: Please post up or send me a PM if you would like to support the June 3-Class Ride of the Month Competition. Thank you as always for your support to JKO! :beer:


1. Heavily Modified Class includes:

VENDOR SUPPORT:
a. poison Spyder Customs - T-Shirt and a $50 gift card
b. TXROCK - One box of AdvoCare Spark Energy Drink (your choice of 7 flavors)


2. Modified Class includes:

VENDOR SUPPORT:
a. NorthRidge 4x4 - $25 Gift Certificate
b. TXROCK - One box of AdvoCare Spark Energy Drink (your choice of 7 flavors)


3. Stock Class includes:

VENDOR SUPPORT:
a. RiverCity Off-Road - $50 Gift Certificate
b. TXROCK - One box of AdvoCare Spark Energy Drink (your choice of 7 flavors)



.
 
See less See more
#3 ·
JKCTAZ - 2011 JK Sporticon (Modified)

I am on the light side of modified, but here we go...

2011 JK Sporticon
RK 1.75 LT BB.
Poly SS Flip Kit with modified stock damper. (Shroud and cup removed to allow shaft side on bracket so frame won't touch eliminating need for extended bumps.)
Rubicon Take-offs painted mineral grey.
Smittybilt Rubicon style sliders.
Flowmaster 50 Series axle back "Crawler" high tucked.
KNN Drop in.
Superwinch LP8500. (Not pictured, just installed)
Hi-Lift Cast Iron Jack on "custom" sport cage mounts.
JCR Dagger Stubby with Mid hoop.
Rigid Dually Floods.
Hella 500FF's
Generic 900 lumen LED floods on brackets above spare out back.







 
#4 · (Edited)
Modified Class

What the hell, I'll throw my hat in for a go this month.

Sorry all my trail pics are with my video guy right now so all I have to offer up is poser shots.

4.5" Trail Master Lift
35" Goodyear Kevlars
17" ATX Ledge wheels
GenRight: (all home finished in bed armor)
  • Front & Rear Aluminum Bumpers
  • Aluminum Tire Carrier w/Hi-Lift mounted
  • Rocker Guards
  • Aluminum Flares
RROR Evap Skid
Arc8000 Switch Controls
Smittybilt Winch
PIAA 580 Lighting on DIY fairlead mount
Custom Cargo Molle Racking
Safari Straps Netting w/ custom side panels for Dogs
SpiderWebShade SW1 JK-4D - UltraMesh
Offroad-Armor.com magnetic trail skins





Ok the one action shot I have.....:laughing:
 
#5 · (Edited)
Modified 2011 Unlimited Rubicon

Suspension

RK 2.5" Stock Mod
Bilstein 5100's
Crown Steel Braided Brake Lines (yellow)
RK Discos
Teraflex Steering Stabilizer
Dominion Off-Road Stabilizer Bracket
RK 2" Rear Bumpstops

Rollers

37x12.50-17 Nitto Trail Grapplers
17x8 XD Bullys w/ PC'd Rock Rings

Exterior
Modified Auto Grills Front Trail Stinger Bumper
Poison Spyder BFH Rear Bumper
Poison Spyder EVAP Skid
GenRight Tire Carrier (currently sitting in garage waiting for paint)
Factory Chopped Flares
Bestop TrekTop NX
AEV Heat Reduction Hood
Drake Hood Pins
Safari Straps Warrior Rear Windows
HIDX 7" A-Pillar Lights
Crown Clear Turn Signals
Mopar Fuel Filler Door w/ Locking Cap

Interior

Drake Billet Fire Extinguisher Mount w/ 2.5 lb Bottle
Master Craft Grab Handles
Tuffy Overhead Console
Cobra 29 LX LE CB w/ 4' FireStik
Rugged Ridge A-Pillar Switch Pod
Smittybilt G.E.A.R. Tailgate Organizer





And a cell pic on my last trip out (not taken by me obviously)
 
#7 · (Edited)
Modified Class

2.5 RX Stock Mod w/ Alum Tie Rod and F/R track bar
Bilstein 5100's
35X12.5X15 - MTRk's
Pro Comp Alloys
PS Brawler Lite/BFH Rear
Superwinch LP8500
LCA Skids
Axle C's
Rear Shock Relo

...some trimming, some welding.









 
#8 ·
Heavily Modified

2008 Rubi Unlimited
2011 5.7L truck VVT and matching 545rfe tranny (Nemesis/BOR west Conversion)
TMD hood
Rebel Coilovers Front and Rear with King 12in coilovers
Dynatrac PR44 unlimited Front, RCV's with stock rubi locker 5:13s
TeraFlex CRD 60 rear, ARB and 5:13s
TeraFlex arms (short)
Tom Woods 13010 Shafts
PSC Hydro assist with Howe ported truck pump and cooler
Warn bumps front and rear
Poly front and rear TBS, tierod and flip steer with DL
39in BFG Krawlers on Champion conversion beadlocks for the trail, 38in Yoks on stock rubis for the street
GOBI steath











 
#10 · (Edited)
Modified Class

08 2dr 6spd D30/44
Rock Krawler 2.5 inch Flex System + front uppers
Bilstein 5100's
Bilstein steering stabilzer
RK drag link
Crown extended brake lines
35x12.5x17 GY MTRs w/K
ATX slots
Yukon 5.13 gears
Pure Jeep backbone brace w/upper+lower C Gussets+CA skids
Poison Spyder BFH front bumper
PSC evap skid
PSC tramp stamp
PSC "oh shit" handles
Coverking seat covers
Smittybilt rockers

I dont take nearly enough wheelin pics as I should. Sorry for the poser shots! :)





 
#11 · (Edited)
2011 JK Modified Class

Here's Mine:

Suspension:
Rock Krawler 2.5 Max Travel Pro Aluminum Kit
Rock Krawler Aluminum Upper Front and Rear Control Arms
Rock Krawler Aluminum Rear Track Bar
Bilstein 5100s

Wheels / Tires:
Rugged Ridge Satin Black
Rugged Ridge Stainless Wheel Protectors
37x12.50R17 Nitto Trail Grappler M/T's

Body / Armor:
Genright Aluminum Front Bumper with Trail Series Stinger
Genright Aluminum Rear Bumper
Genright Aluminum Fenders
Genright Aluminum Tire Carrier
Metalcloak LED Tail Lights
Pure Jeep Front Axle Truss / C Gussets / Front & Rear LCA Skids
JCR Engine / Tranny Skid
Under Cover Fab Plate Diff Covers
Smittybilt SRC Rocker Guards
Rugged Ridge Evap Skid Plate

Driveline:
Tom Woods front drive shaft.

Extras:
Engo 9k Synthetic Line Winch
Dominion On Board Air
Dominion Steering Stabilizer Flip
Bilstein Steering Stbilizer
KC Slimlites (Driving) on Rugged Ridge windshield mounts
Cobra 75 CB
Hi Lift













 
#12 ·
modified.
few quick mods that i can remember...
35 inch dick cepeks
9k super winch
replaced front and rear bumpers
5 kc daylighters on rufgged ridge light bar
old man emu nitro shocks in front
fox racing shocks in rear
hid conversion
piaa driving lights
theres more, just cant remember right now.



 
#14 ·
Modified class

2010 2dr Rubi 6spd

RK 2.5" max pro
PSC BHF front and rear
Warn 9.5 cti
Viking synth line
Rigid duallys
RROR full skid
Evo gussets and CA skids
Purejeep backbone
37" nitto trail grapplers

On 35s




Now 37s!!


 
#16 · (Edited)
Stock JK

View attachment 52419
Land vehicle Vehicle Car Jeep Tire


2012 Rubicon Unlimited with 13,000 miles

Powder coated stock wheels
Rigid 50" LED light bar with powder coated Spyder A-pillar brackets
1 1/2" front level kit - spring spacer (however AEV is on my wish list)
Husky front and rear floor mats
Water proof seat covers for front seats
Grab handles for all passengers
Mopar Kicker speakers in front dash and overhead speaker box with dynamat lining and poly fill.
Mopar door sills
Mopar fuel cap cover with locking fuel cap
Mopar front hood lock
Medium tint on all windows
K&N drop in air filter
5W-30 Royal Purple synthetic oil

Unfortunately I currently have my Jeep in the shop for the left side cylinder head replacement. Should have it back next week...so Johnson Valley here I come...again!

:thankyou:The bottom picture is before the black powder coated wheels.

And in case anybody wants to know what the blue tape is for - well I cut out magnets and apply them to the side of my doors and 1/4 panels, then apply blue painters tape on the leading edges to prevent the magnets from peeling off when going 80 mph down the freeway. With 13,000 miles on the clock the paint still looks new. Best of all I don't have chapparral pin stripping!:gluging:
 

Attachments

#19 ·
2010 Unlimited Sport

Exterior
XRC 8 w/ Viking Synthetic Line
GenRight Aluminum Flares
GenRight Aluminum Tire Carrier
EVO Rear Frame D Shackle Tabs
Shrockworks rails
Poison Spyder Customs Evap Skid
Poison Spyder Customs Body Armor
Poison Spyder Customs Front BFH
Nitro Diff Covers, F/R
Rigid Duallys (Spot and Flood)
Tantrum Vision X Rock Lights

Interior
Daystar dash organizer
Grab handles
Hothead Headliners
Mopar mats

Under the hood
sPOD
ARB Compressor
Yukon 4.88

Suspension
Poly Performance 3" Coils
Fox IPF 2.0 Performance Shocks
Rock Krawler Control Arms all around
Teraflex Front Trackbar
Poly Track Bar Axle Brackets F/R
Poly Drag Link Flip
Poly Ball Joints
Poly Cs
Poly Rear Shock Relocation Brackets
Poly Lower Control Arm Skids
Nitro Sleeves
Nitro Axle Shafts
TeraFlex Speed Bumps Rear

Wheel and Tire
Black Rhino Ocotillo
37" Goodyear MTRs

Man Mall photo


Others


 
#20 ·
Hey Everyone, had to make a work trip from Hawaii to D.C. on Friday then down to Williamsburg, Virginia for a 2 week training class......finally got settled in at 10pm saturday night....traffic was a BEAST!

With that, I am going to extend the date by a day to make sure I am not putting together the voting threads together through my eyeballs...would suck to have a stock JK in the heavily modified class!!! :laughing: :laughing:

I have some training class setups to put together this morning and will start building the voting threads later this afternoon so that we can kick off the voting later this evening! :beer:


Thanks in advance for understanding! :beer: :beer: :beer:
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top