JKOwners Forum banner

Springless coilovers?

2K views 3 replies 4 participants last post by  THECHAD 
#1 ·
Can this be run without harming the shocks?

In other words, I wanna change out my shocks to coil overs, but cant afford the whole setup, but will run my lift kits' springs in the factory location with the c/o shocks in the OEM spots too.
 
#2 · (Edited)
I don't know if there is a specific set up for the JK to run springless but a lot of buggies run shocks only. Walker Evan makes air shocks for a springless set up but no idea if those would work on the JK. If you are talking about running springless coil over shock, personal opinion, I would not do it since the shock is not designed to support the full weight of the Jeep

edit: just re read and saw you would run the coil springs. I would just wait until you can afford to install the coilover shock and spring together. Maybe you would be ok and maybe not, but I say have some patience and wait till you have to entire correct seup.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top