Confirmed Wheel Fitment - JkOwners.com

WTF_LOL · 10-30-2007, 11:51 AM

So I was thinking we all could put together a good resource for somebody in the market for new wheels...especially for 15" and 16" wheels but all types and sizes would be great to see!

Please post up specs, comments and pics on wheels that you have confirmed fit (or do not fit

).

EDIT: this thread was started back in 2007 when we were still unsure which wheels would fit the JK. NOw that there are so many wheels out there please just post whatever it is you are running as a resource for those in the market for new wheels!

Give as much info as possible and a pic if you got it!

Brand:
Model:
Height/Width:
Offset:
Backspacing:
Wheel spacer:
Tires:
Related mods:
Fitment comments:
Pics!:

WTF_LOL · 10-30-2007, 11:52 AM

I will start...

Brand: Unique (exact same manufacture as Crager so should be the same)
Model: "Soft 8"
Height/Width: 15x8
Offset: -13
Backspacing: 4"
Wheel spacer: none
Tires: 35x1250 BFG KM's
Related mods: 2.5" lift, stock arms.
Fitment comments: These wheels fit on and spun freely with no mods. However, there was a very slight rubbing. I had to take down the corners and some "ridges" of calipers only very slightly with the grinder. I did not have to remove enough material to make any performance difference, it really was just a touch of material removed. In the future I think I would go with a brand like the Pro Comp Rock crawlers just because theu have a 3.75" backspacing for a little more breathing room. Otherwise...Confirmed to fit! They are though, just as tight of a fit as I feel comfortable with. Also, the spare fit the stock carrier with no spacer needed!
Pics!:

WikedLizard · 10-30-2007, 02:35 PM

Brand: Enkei
Model: RT6
Height/Width: 17x8
Offset: 0
Backspacing: ??? (Will find out)
Part No: 25278073SM
Bore Dia: 3.30"
Cap No: ATK-3300LBF
Finish: SILVER WITH DIAMOND-CUT FACE
Wheel spacer: N/A
Tires: Dunlop Radial Mud Rover
Related mods: N/A
Fitment comments: Fit great. No rubbing at all.
Pics!:

RedRockJK · 10-30-2007, 08:54 PM

I have several wheels to offer confirmation on.

Brand: Jeep
Model: Hulk
Height/Width: 17x7.5
Backspacing: 6.25"
Wheel spacer: Yes, Spidertrax 1.5"
Tires: 315/70/17 Hankook RT03
Related mods: 3" Black Diamond lift
Fitment comments: Fit great

Brand: Cragar
Model: Soft 8's
Height/Width: 15x8
Backspacing: 4"
Wheel spacer: None
Tires: 35x12.50x15 ProComp XTerrain
Related mods: 3" Black Diamond lift
Fitment comments: Fit great!

Brand: ION
Model: 170
Height/Width: 15x8
Backspacing: 3.5"
Wheel spacer: None
Tires: 37x12.50x15 Goodyear MT/R
Related mods: 3" Black Diamond lift + 1" M.O.R.E. body lift
Fitment comments: Fit great!

.
.
.

MichaelW · 10-30-2007, 09:53 PM

These Eagle Alloys do not fit without modification.

007JOE · 10-30-2007, 11:09 PM

Hey RedRockJK, how do you or how did you like those Hankook tires? Those are the ones i'm planning on getting so any feedback would be greatly appreciated. Nice Jeep by the way!

Ipe · 10-31-2007, 04:30 AM

Hey Folks! This is my first post over here and even though I don't have a JK yet, my hunt for that ever elusive beast, the Rubicon Unlimited continues!

OO7JOE - I have the 'Kooks on my current truck and like them a lot. I wrote a review of the RT03 for Off-Road.com that you can read here. Since I wrote the review I've had the opportunity to run them in a variety of other conditions, including some very nasty wet weather and I continue to have nothing but great things to say about them. (Warning - The editor over at Off-Road.com had a field day with my article and added in a lot of BS... "Old Girl"

)

When I get my JK I'll be transitioning my RT03's and Staun bead locks onto another set of wheels and running them with a 3 or 4" lift. I can't wait!

OBTW - this is a great thread and will come in handy when it comes time to get wheels for the new truck. Thanks!

PhilD · 10-31-2007, 07:28 AM

Brand: ProComp
Model: Extreme 7189
Height/Width: 17 x 9
Backspacing: 4.75
Wheel spacer: None
Tires: Irok Radial 36x13.50x17
Related mods: 4" Lift, 1 3/4" front spacer
Fitment comments: Trimmed seam at front of rear wheel well. Tires rubbed hard in the front wheel wells at full flex, so added additional 3/4" lower bump stop spacer. Tires rubbed hard on front RockRunner control arms at full lock, so adjusted steering stops.

PhilD · 10-31-2007, 07:31 AM

Pics:

007JOE · 10-31-2007, 12:16 PM

IPE, thanks for the info on the tires! I'll definately read that article. So far I keep hearing nothing but great things about those tires and also that they are cheaper than comparable 35's. I'll be getting these along with a 3" lift.

Edit:Hey, I've read that article before. Good job! I have to ask though, what are you doing on this site when you have a (oh oh) Hummer? LOL. Just messing with you. Welcome though and hope you like it hear.

Ipe · 10-31-2007, 12:46 PM

Quote:

Originally Posted by 007JOE

IPE, thanks for the info on the tires! I'll definately read that article. So far I keep hearing nothing but great things about those tires and also that they are cheaper than comparable 35's. I'll be getting these along with a 3" lift.

Edit:Hey, I've read that article before. Good job! I have to ask though, what are you doing on this site when you have a (oh oh) Hummer? LOL. Just messing with you. Welcome though and hope you like it hear.

Its all good!

Believe it or not I have a feeling that the H3's days are numbered... I'm seeing a JK in my future.

P.S. Glad that you liked the article and found it helpful

usmcdoc14 · 11-02-2007, 02:32 PM

Brand: Cregar/whoever (they are pretty much all made by the same company)
Model: "D" window or "rock crawler" or whatever depending on who re-badges them
Height/Width:15x8
Backspacing: 4
Wheel spacer: none
Tires:35x12.5 Radial claws
Related mods: 4" superlift
Fitment comments: fits fine, no clearance issues. Bumper end WILL require trimming and I recomend cutting/hammering flat the rear pinch weld
Pics!:

dodge8604 · 11-03-2007, 01:42 AM

^^^^ I could get those with a chrome hub cap couldn't I??? ^^^^^

Thanks!

WTF_LOL · 11-03-2007, 02:53 AM

Quote:

Originally Posted by dodge8604

^^^^ I could get those with a chrome hub cap couldn't I??? ^^^^^

Thanks!

You can!

as a matter of fact, I have not seen a black one and assume he painted his

usmcdoc14 · 11-03-2007, 09:49 PM

Quote:

Originally Posted by WTF_LOL

You can!

as a matter of fact, I have not seen a black one and assume he painted his

yes, they are "normally" chrome. I sand blasted them and painted them black with black plated lug nuts. My vehicle has been almost completely de-chromed. I have to pull the door locks and duracoat them next time I am coating some guns.

WTF_LOL · 11-03-2007, 09:52 PM

Your rig is looking really good. PLease post up picks when you get the locks done. I had never thought of that but I bet it will look nice!

dodge8604 · 11-04-2007, 10:33 PM

Quote:

Originally Posted by usmcdoc14

yes, they are "normally" chrome. I sand blasted them and painted them black with black plated lug nuts. My vehicle has been almost completely de-chromed. I have to pull the door locks and duracoat them next time I am coating some guns.

Don't forget the headlights!!!

Dougolupski · 11-05-2007, 07:36 PM

Brand: KMC
Model: XD 795 HOSS B
Height/Width: 17X9
Offset:
Backspacing: 4.56
Wheel spacer: NONE
Tires: MAXXIS BIGHORNS 305/70/R17 33.25 REAL WORLD HEIGHT AT 27PSI
Related mods: MORE 1" BODY LIFT
Fitment comments: I have a 3\4 level spacer in the front and a 1" body lift and WITH the sway bars hooked up there is absolutley no rubbing.

Pics!:

extrication · 11-12-2007, 04:56 PM

Brand: Cragar
Model: Soft 8's
Height/Width: 17x9
Offset:
Backspacing: 5"
Wheel spacer: None
Tires: Toyo 35/12.5/17
Related mods: FT 3" Ultimate HD - The front end rides a little high - The new bumper and winch should level it.
Fitment comments: No Problems
Pics!: Soon

WTF_LOL · 03-14-2008, 12:09 PM

So is that it? Nobides posted for 4 months!

Is that all the different wheels everybody on Jkowners is runnin?

If you have some wheels not listed yet post up!!

BigO · 03-14-2008, 12:54 PM

Quote:

Originally Posted by WTF_LOL

So is that it? Is that all the different wheels everybody on Jkowners is runnin?

Okay, you guilted me in to it.

Brand: Pro Comp
Model: 8179
Height/Width: 16x10
Offset:
Backspacing: 4.5"
Wheel spacer: nope
Tires: 315/75R16 (34.5" dia.) BFG Mud Terrains
Related mods: 3" FT lift
Fitment comments: Front tires rubbed the plastic air dam thing at full turn. Tin snips and 2 minutes took care of that.
Pics!:

Warlock · 03-17-2008, 10:30 AM

Brand: All American Racing
Model: ATX series THUG
Size: 17x9
Backspacing 4" ?? (im pretty sure)
Tires: BFG KM2 35x12.50x17
Related Mods: Superlift supsension 4"
Comments: Awsome tire and aggressive look (should have went 37')

Warlock · 03-17-2008, 10:31 AM

WTF_LOL · 04-19-2008, 01:32 AM

Now those are some good lookin wheels in the last pic!

John L · 04-19-2008, 05:25 AM

OK, here's mine..

Brand: Eagle Alloy
Model: Series 186
Height/Width: 15x8
Offset: -1.181"
Backspacing: 3.25"
Wheel spacer: none
Tires: Procomp 33/12.5R15 Mud Terrain
Related mods: lugnuts so they won't fall off
Fitment comments: good fit, no problems after 15 months
Pics!:

Brand new on delivery.

After 2.5" lift.

10-30-2007, 11:51 AM	#1
WTF_LOL Banned Join Date: Aug 2007 Member # 100 Location: Denver Posts: 3,247	Confirmed Wheel Fitment So I was thinking we all could put together a good resource for somebody in the market for new wheels...especially for 15" and 16" wheels but all types and sizes would be great to see! Please post up specs, comments and pics on wheels that you have confirmed fit (or do not fit ). EDIT: this thread was started back in 2007 when we were still unsure which wheels would fit the JK. NOw that there are so many wheels out there please just post whatever it is you are running as a resource for those in the market for new wheels! Give as much info as possible and a pic if you got it! Brand: Model: Height/Width: Offset: Backspacing: Wheel spacer: Tires: Related mods: Fitment comments: Pics!: Last edited by WTF_LOL; 08-26-2009 at 06:09 PM.

10-30-2007, 11:52 AM	#2
WTF_LOL Banned Join Date: Aug 2007 Member # 100 Location: Denver Posts: 3,247	I will start... Brand: Unique (exact same manufacture as Crager so should be the same) Model: "Soft 8" Height/Width: 15x8 Offset: -13 Backspacing: 4" Wheel spacer: none Tires: 35x1250 BFG KM's Related mods: 2.5" lift, stock arms. Fitment comments: These wheels fit on and spun freely with no mods. However, there was a very slight rubbing. I had to take down the corners and some "ridges" of calipers only very slightly with the grinder. I did not have to remove enough material to make any performance difference, it really was just a touch of material removed. In the future I think I would go with a brand like the Pro Comp Rock crawlers just because theu have a 3.75" backspacing for a little more breathing room. Otherwise...Confirmed to fit! They are though, just as tight of a fit as I feel comfortable with. Also, the spare fit the stock carrier with no spacer needed! Pics!: Last edited by WTF_LOL; 04-19-2008 at 01:13 AM.

10-30-2007, 02:35 PM	#3
WikedLizard Wheeler Join Date: Apr 2007 Member # 39 Location: Spring, TX. Posts: 28	Brand: Enkei Model: RT6 Height/Width: 17x8 Offset: 0 Backspacing: ??? (Will find out) Part No: 25278073SM Bore Dia: 3.30" Cap No: ATK-3300LBF Finish: SILVER WITH DIAMOND-CUT FACE Wheel spacer: N/A Tires: Dunlop Radial Mud Rover Related mods: N/A Fitment comments: Fit great. No rubbing at all. Pics!: __________________ http://www.supermotors.org/getfile/2.../vancesig2.gif

10-30-2007, 08:54 PM	#4
RedRockJK Granite Guru Join Date: Jul 2007 Member # 79 Location: Central Arkansas Posts: 200	I have several wheels to offer confirmation on. Brand: Jeep Model: Hulk Height/Width: 17x7.5 Backspacing: 6.25" Wheel spacer: Yes, Spidertrax 1.5" Tires: 315/70/17 Hankook RT03 Related mods: 3" Black Diamond lift Fitment comments: Fit great Brand: Cragar Model: Soft 8's Height/Width: 15x8 Backspacing: 4" Wheel spacer: None Tires: 35x12.50x15 ProComp XTerrain Related mods: 3" Black Diamond lift Fitment comments: Fit great! Brand: ION Model: 170 Height/Width: 15x8 Backspacing: 3.5" Wheel spacer: None Tires: 37x12.50x15 Goodyear MT/R Related mods: 3" Black Diamond lift + 1" M.O.R.E. body lift Fitment comments: Fit great! . . . __________________ 2007 Rubicon Unlimited: MODS: Superior 5.13 Gears, Black Diamond 3" Lift, 1" M.O.R.E. Body Lift, FT Rear Adj. Trackbar, 15x8 ION 170 wheels, 37x12.50x15 Goodyear MT/R's, Superwinch EPi9.0, Smittybilt SRC front bumper, IGGEE Black/Charcoal seat covers, relocated muffler (Magnaflow 11376). http://www.RedRockJK.com

10-30-2007, 09:53 PM	#5
MichaelW Broke Dick Dog Join Date: Mar 2007 Member # 20 Location: Cartoon City Nirvana Posts: 2,721 Images: 9	These Eagle Alloys do not fit without modification. __________________ Michael W Probable cause. Due process. Innocent until proven guilty. Rights to reasonable privacy. 4th Amendment. You ARE the enemy. "The tree of liberty must be refreshed from time to time with the blood of patriots and tyrants." I know why you did it. I know you were afraid. Who wouldn't be? War, terror, disease. There were a myriad of problems which conspired to corrupt your reason and rob you of your common sense. Fear got the best of you, and in your panic you turned to....

10-30-2007, 11:09 PM	#6
007JOE Granite Guru Join Date: Oct 2007 Member # 192 Location: Sacramento, CA. Posts: 172	Hey RedRockJK, how do you or how did you like those Hankook tires? Those are the ones i'm planning on getting so any feedback would be greatly appreciated. Nice Jeep by the way! __________________ 07 Unlimited Shara, Auto, Hardtop, Silver, 18" factory wheels

10-31-2007, 04:30 AM	#7
Ipe I heart the CV! Join Date: Oct 2007 Member # 326 Location: Boston, MA Age: 42 Posts: 905	Hey Folks! This is my first post over here and even though I don't have a JK yet, my hunt for that ever elusive beast, the Rubicon Unlimited continues! OO7JOE - I have the 'Kooks on my current truck and like them a lot. I wrote a review of the RT03 for Off-Road.com that you can read here. Since I wrote the review I've had the opportunity to run them in a variety of other conditions, including some very nasty wet weather and I continue to have nothing but great things to say about them. (Warning - The editor over at Off-Road.com had a field day with my article and added in a lot of BS... "Old Girl" ) When I get my JK I'll be transitioning my RT03's and Staun bead locks onto another set of wheels and running them with a 3 or 4" lift. I can't wait! OBTW - this is a great thread and will come in handy when it comes time to get wheels for the new truck. Thanks! Last edited by Ipe; 10-31-2007 at 06:08 AM.

10-31-2007, 07:28 AM	#8
PhilD JKowners Vendor Join Date: Sep 2007 Member # 143 Location: Texas Posts: 3,941	Brand: ProComp Model: Extreme 7189 Height/Width: 17 x 9 Backspacing: 4.75 Wheel spacer: None Tires: Irok Radial 36x13.50x17 Related mods: 4" Lift, 1 3/4" front spacer Fitment comments: Trimmed seam at front of rear wheel well. Tires rubbed hard in the front wheel wells at full flex, so added additional 3/4" lower bump stop spacer. Tires rubbed hard on front RockRunner control arms at full lock, so adjusted steering stops. Last edited by PhilD; 10-31-2007 at 07:32 AM.

10-31-2007, 07:31 AM	#9
PhilD JKowners Vendor Join Date: Sep 2007 Member # 143 Location: Texas Posts: 3,941	Pics:

10-31-2007, 12:16 PM	#10
007JOE Granite Guru Join Date: Oct 2007 Member # 192 Location: Sacramento, CA. Posts: 172	IPE, thanks for the info on the tires! I'll definately read that article. So far I keep hearing nothing but great things about those tires and also that they are cheaper than comparable 35's. I'll be getting these along with a 3" lift. Edit:Hey, I've read that article before. Good job! I have to ask though, what are you doing on this site when you have a (oh oh) Hummer? LOL. Just messing with you. Welcome though and hope you like it hear. __________________ 07 Unlimited Shara, Auto, Hardtop, Silver, 18" factory wheels Last edited by 007JOE; 10-31-2007 at 12:20 PM.

11-02-2007, 02:32 PM	#12
usmcdoc14 The Wrath of Spork Join Date: Oct 2007 Member # 206 Location: Lead Farming Posts: 1,020 Images: 26	Brand: Cregar/whoever (they are pretty much all made by the same company) Model: "D" window or "rock crawler" or whatever depending on who re-badges them Height/Width:15x8 Backspacing: 4 Wheel spacer: none Tires:35x12.5 Radial claws Related mods: 4" superlift Fitment comments: fits fine, no clearance issues. Bumper end WILL require trimming and I recomend cutting/hammering flat the rear pinch weld Pics!: __________________ You like guns? Camping? Killing woodland critters with pointy sticks? Well then click here !

11-03-2007, 01:42 AM	#13
dodge8604 wtf over? Join Date: Oct 2007 Member # 323 Location: Fort Bragg, NC/Brooksville, Ky Age: 23 Posts: 357	^^^^ I could get those with a chrome hub cap couldn't I??? ^^^^^ Thanks! __________________ "I'm the 82nd airborne and this is as far the bastards are going!" I'm a 1st Platoon Bastard, and dern proud of it 08 JKU X - Flame Red ~ Waiting for Install ~ Teraflex 4" - RC Dual SS -Kilby Evap Relo - a few other gadgets - ALPHA EXPEDITION

11-03-2007, 09:52 PM	#16
WTF_LOL Banned Join Date: Aug 2007 Member # 100 Location: Denver Posts: 3,247	Your rig is looking really good. PLease post up picks when you get the locks done. I had never thought of that but I bet it will look nice!

11-05-2007, 07:36 PM	#18
Dougolupski Wheeler Join Date: Oct 2007 Member # 243 Location: Santa Barbara, CA Posts: 63	Brand: KMC Model: XD 795 HOSS B Height/Width: 17X9 Offset: Backspacing: 4.56 Wheel spacer: NONE Tires: MAXXIS BIGHORNS 305/70/R17 33.25 REAL WORLD HEIGHT AT 27PSI Related mods: MORE 1" BODY LIFT Fitment comments: I have a 3\4 level spacer in the front and a 1" body lift and WITH the sway bars hooked up there is absolutley no rubbing. Pics!: __________________ Jeep: 07 Wrangler X 2DR Black Crime Guard Alarm with 2way pager, AFE CAI, DynaPro Exhuast M.O.R.E. Body Lift, Source Co2 Tank, Stubbied Stock Front Bumper KMC XD 795 Hoss Black 17" wheels and Maxxis Bighorn 305/70/17 tires Every mod in the write up section. Old Jeep: 04 Wrangler X Yellow Built To The Hilt For Three Great Years. POLISH JEEP OWNERS CLUB #2

11-12-2007, 04:56 PM	#19
extrication Wheeler Join Date: Oct 2007 Member # 342 Location: CA Posts: 42 Images: 1	Brand: Cragar Model: Soft 8's Height/Width: 17x9 Offset: Backspacing: 5" Wheel spacer: None Tires: Toyo 35/12.5/17 Related mods: FT 3" Ultimate HD - The front end rides a little high - The new bumper and winch should level it. Fitment comments: No Problems Pics!: Soon

03-14-2008, 12:09 PM	#20
WTF_LOL Banned Join Date: Aug 2007 Member # 100 Location: Denver Posts: 3,247	So is that it? Nobides posted for 4 months! Is that all the different wheels everybody on Jkowners is runnin? If you have some wheels not listed yet post up!! Last edited by WTF_LOL; 04-19-2008 at 01:33 AM.

03-17-2008, 10:30 AM	#22
Warlock Granite Guru Join Date: Nov 2007 Member # 628 Posts: 107	Brand: All American Racing Model: ATX series THUG Size: 17x9 Backspacing 4" ?? (im pretty sure) Tires: BFG KM2 35x12.50x17 Related Mods: Superlift supsension 4" Comments: Awsome tire and aggressive look (should have went 37')

03-17-2008, 10:31 AM	#23
Warlock Granite Guru Join Date: Nov 2007 Member # 628 Posts: 107

04-19-2008, 01:32 AM	#24
WTF_LOL Banned Join Date: Aug 2007 Member # 100 Location: Denver Posts: 3,247	Now those are some good lookin wheels in the last pic!

04-19-2008, 05:25 AM	#25
John L Rock God Join Date: Mar 2007 Member # 24 Posts: 902	OK, here's mine.. Brand: Eagle Alloy Model: Series 186 Height/Width: 15x8 Offset: -1.181" Backspacing: 3.25" Wheel spacer: none Tires: Procomp 33/12.5R15 Mud Terrain Related mods: lugnuts so they won't fall off Fitment comments: good fit, no problems after 15 months Pics!: Brand new on delivery. After 2.5" lift. Attached Images __________________ /jl Healthy is merely the slowest possible rate at which one can die.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode