New Tail Gate Plates from Desert Snake - Page 9

DesertSnake · 01-08-2012, 02:40 PM

Here is one a client ordered recently

Cheer

Alex

Southern Girl · 01-08-2012, 03:09 PM

You guys do great work! Here's mine...thanks Alex!

jkx0778 · 01-10-2012, 03:26 PM

Quote:

Originally Posted by DesertSnake

We can do it for $30 + shipping.

cheers

Alex

how much for one in 3/16" with the center cut out to clear the stock plastic/rubber baffles... shipped to 78238?

DesertSnake · 01-10-2012, 03:55 PM

Quote:

Originally Posted by jkx0778

how much for one in 3/16" with the center cut out to clear the stock plastic/rubber baffles... shipped to 78238?

We will honor the same price and shipping is a flat rate of $20. I will need to know if your vent is the vertical or horizontal type for the cutout.

Cheers

Alex

jkx0778 · 01-17-2012, 03:41 PM

Quote:

Originally Posted by jkx0778

how much for one in 3/16" with the center cut out to clear the stock plastic/rubber baffles... shipped to 78238?

Quote:

Originally Posted by DesertSnake

We will honor the same price and shipping is a flat rate of $20. I will need to know if your vent is the vertical or horizontal type for the cutout.

Cheers

Alex

Thanks Alex. It's vertical, that is it's taller more than it is wider.
Also, can you pm me your paypal or phone # to call in a credit card payment.

Thanks again!

GKR · 01-23-2012, 04:30 PM

Thanks Alex !

KillerKoatings · 02-06-2012, 09:29 PM

I would like one in plain steel as well. Where to I paypal the money too. Thanks!!

DesertSnake · 02-07-2012, 05:01 PM

Quote:

Originally Posted by KillerKoatings

I would like one in plain steel as well. Where to I paypal the money too. Thanks!!

Send us an email @ sales@desertsnakeoffroad.com with the details of the plate

- Logo /no logo
- if no logo..... cut out orientation on your jeep tail gate

cheers
Alex

jkx0778 · 02-08-2012, 09:03 AM

Quote:

Originally Posted by DesertSnake

Send us an email @ sales@desertsnakeoffroad.com with the details of the plate

- Logo /no logo
- if no logo..... cut out orientation on your jeep tail gate

cheers
Alex

Mmmmm the plain, no logo, with vertical cut, in 3/16" steel plate that I order is pure sexiness IMHO. Thanks again Alex.

King_ · 02-09-2012, 03:14 PM

These guys are GREAT! Got mine here quick!

JH08JK · 02-24-2012, 10:16 PM

Quote:

Originally Posted by DesertSnake

As you can see in the pictures from Jeep Beach 2011, we were talking to Kenny Hauk (River Raider owner) about your request. We are working on getting their logo and he's willing to sell the plates on his site. Not ETA yet

I know its been awhile but did this ever happen?

DesertSnake · 02-25-2012, 04:38 PM

Quote:

Originally Posted by JH08JK

I know its been awhile but did this ever happen?

Yes it did happen, river raider should be selling the plates on its website.

Cenair

Solless · 03-07-2012, 09:46 AM

Any more thought on info on making these out of aluminum? Here in Michigan in the "rust belt", I'm tired of the cover I have rusting, and would be interested to know what the cost difference would be with using an aluminum plate.

Jeep2.0 · 03-07-2012, 10:22 AM

Aluminum? Hell, a nice piece of Stainless would look schweet!

jjbooth · 03-07-2012, 10:53 AM

Quote:

Originally Posted by King_

These guys are GREAT! Got mine here quick!

Hey where did u get your three black tailgate plugs?????????

DesertSnake · 03-07-2012, 11:25 AM

Quote:

Originally Posted by Solless

Any more thought on info on making these out of aluminum? Here in Michigan in the "rust belt", I'm tired of the cover I have rusting, and would be interested to know what the cost difference would be with using an aluminum plate.

Yes we make them in Aluminum,

cost break down:

Regular plate price:
Steel = $49.00
Aluminum = $69.00
Stainless = $119.00

Custom logo design fee = $20.00

Shipping = $20.00

DesertSnake · 03-07-2012, 11:26 AM

Quote:

Originally Posted by Jeep2.0

Aluminum? Hell, a nice piece of Stainless would look schweet!

We already cut one in stainless and the client had it polished

Jeep2.0 · 03-07-2012, 03:24 PM

To each his own, but polished looks too much like Chrome to me. Brushed stainless would look much better. (To me anyway).

DesertSnake · 03-07-2012, 03:52 PM

Quote:

Originally Posted by Jeep2.0

To each his own, but polished looks too much like Chrome to me. Brushed stainless would look much better. (To me anyway).

Our plates comes brushed, that was a client's preference. He had a guy polishing for him

taxman · 03-07-2012, 04:22 PM

Quote:

Originally Posted by Jeep2.0

To each his own, but polished looks too much like Chrome to me. Brushed stainless would look much better. (To me anyway).

Matches the door handles and D-rings.

Crazygrady127 · 03-09-2012, 03:11 AM

What is that tube coming off of his D-ring ?? That would make a good fishing rod holder !!

rob4607 · 03-09-2012, 03:54 AM

Probably for a surf rod, or regular fishing rod.

TexasFortune · 03-09-2012, 07:14 AM

looks like a surf rod holder to me

scrogg · 06-24-2012, 08:17 PM

Hey DesertSnake, you still doing these? And if so, is it possible to send you a dxf file, or other of the sort, of the design? And if need be, you (or me) can scale it up or down to fit the available area?

We want to do a "T-N-T" type thing with some sort of explosion background. Not to busy and of course friendly enough to be cut out on the table that you use. Or if you already have something similar I'd love to see it.

Walldog · 06-25-2012, 03:55 AM

Quote:

Originally Posted by GKR

Thanks Alex !

hey anyone know the brand of this rear bar? i want one of these for the rear winch

01-08-2012, 02:40 PM	#201
DesertSnake JKowners Vendor Join Date: Mar 2011 Member # 14438 Location: Tampa, Florida Posts: 164 Feedback: 1 reviews	New Plate Here is one a client ordered recently Cheer Alex __________________ Desert Snake http://www.DesertSnakeOffroad.com http://www.facebook.com/DesertSnakeOffroad

01-08-2012, 03:09 PM	#202
Southern Girl Displaced Tennessean Join Date: Sep 2011 Member # 17444 Location: Afghanistan Posts: 415 Feedback: 0 reviews	You guys do great work! Here's mine...thanks Alex! __________________ American by Birth! Southern by the Grace of God!

02-09-2012, 03:14 PM	#210
King_ Newbie Join Date: Feb 2012 Member # 19771 Posts: 2 Feedback: 0 reviews	These guys are GREAT! Got mine here quick! __________________ 2011 Mango Tango Rock Krawler 2.5 Mod w/Rough Country 2.2 Rough Country 1.25 Body lift Eagle Alloy 058 15x10 Goodyear MT/R Kevlar 35x12.5x15 Spidertrax 1.5 Spacers DDM 6000K H.I.D. Custom Tramp Stamp Last edited by King_; 02-09-2012 at 06:53 PM.

03-09-2012, 03:11 AM	#221
Crazygrady127 Granite Guru Join Date: Feb 2010 Member # 8195 Location: Madison Hgts Mi. Posts: 183 Feedback: 0 reviews	What is that tube coming off of his D-ring ?? That would make a good fishing rod holder !! __________________ Tear It Up - Fix It - And Do It Again !!

03-09-2012, 03:54 AM	#222
rob4607 JKO Addict! Join Date: Apr 2009 Member # 4052 Location: San Leon, Texas Posts: 2,614 Feedback: 7 reviews	Probably for a surf rod, or regular fishing rod. __________________ 2008 JK 4Dr Rubicon Stone white Mygig W/Uconnect working. Hard top/Auto tranny First mod, dog slobber. Painted hard top Spidertraxx 1.5 spacers Teraflex 3" lift Currie front lower control arms JKS front and rear adj. track bars Euroefx HID kit, high/low beam and fogs Shrockworks rear full width, tire carrier Post count from the "other" place when i was following the "herd" was 692 on 4-2-09, not a noob...

01-23-2012, 04:30 PM	#206
GKR Granite Guru Join Date: Apr 2010 Member # 9118 Age: 49 Posts: 289 Feedback: 6 reviews	Thanks Alex !

02-06-2012, 09:29 PM	#207
KillerKoatings Wheeler Join Date: Feb 2010 Member # 8104 Location: Independence, KY Age: 40 Posts: 83 Feedback: 1 reviews	I would like one in plain steel as well. Where to I paypal the money too. Thanks!!

03-07-2012, 09:46 AM	#213
Solless Granite Guru Join Date: Jul 2009 Member # 5264 Age: 33 Posts: 138 Feedback: 0 reviews	Any more thought on info on making these out of aluminum? Here in Michigan in the "rust belt", I'm tired of the cover I have rusting, and would be interested to know what the cost difference would be with using an aluminum plate.

03-09-2012, 07:14 AM	#223
TexasFortune Granite Guru Join Date: Jun 2009 Member # 4884 Location: Katy, Texas Age: 37 Posts: 137 Feedback: 0 reviews	looks like a surf rod holder to me

06-24-2012, 08:17 PM	#224
scrogg Rock God Join Date: Apr 2008 Member # 1196 Location: Utah Posts: 843 Feedback: 0 reviews	Hey DesertSnake, you still doing these? And if so, is it possible to send you a dxf file, or other of the sort, of the design? And if need be, you (or me) can scale it up or down to fit the available area? We want to do a "T-N-T" type thing with some sort of explosion background. Not to busy and of course friendly enough to be cut out on the table that you use. Or if you already have something similar I'd love to see it. __________________ '07 JK Unlimited Rubicon Bright Silver Metallic Last edited by scrogg; 06-24-2012 at 08:19 PM.

Remove Advertisements Sponsored Links
JKOwners.com Advertisement

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode