Welcome Tom Wood's Custom Drive Shafts! - Page 4 - JKowners.com : Jeep Wrangler JK Forum
 
JKowners.com : Jeep Wrangler JK Forum  

Go Back   JKowners.com : Jeep Wrangler JK Forum > Approved Vendor's Showcase > Tom Wood's Custom Drive Shafts

JKOwners.com is the premier Jeep JK Forum on the internet. Registered Users do not see the above ads.
 
 
Share Thread Tools Display Modes
Old 12-13-2011, 06:40 PM   #76
jeep2007
Wheeler
 
jeep2007's Avatar
 
Join Date: Nov 2011
Member # 18206
Location: Greenwood, IN
Posts: 52
Feedback: 0 reviews
Being I have had many Jeeps, not sure I have had as good customer service as I have personally experienced from Tom. My frt driveshaft is top notch and highly recommend it. I wheeled it at the Badlands the weekend I installed it.

Talk to you soon Tom,
Rich Evans
jeep2007 is offline   Quick reply to this message
Sponsored Links
Advertisement
 
Old 12-18-2011, 01:04 PM   #77
616fun
Granite Guru
 
616fun's Avatar
 
Join Date: Nov 2011
Member # 18209
Location: Indianapolis, IN
Posts: 436
Garage
Feedback: 1 reviews
Looks like I'll be using my coupon sooner than I thought. I was under the Jeep searching for a strange noise and found a torn boot....
616fun is offline   Quick reply to this message
Old 12-23-2011, 05:55 AM   #78
JK07
Granite Guru
 
Join Date: Apr 2009
Member # 4312
Posts: 391
Feedback: 0 reviews
The ONLY thing i recieved 100% perfect according to spec and without any problems was Tom Woods 1350 and 1310 drive shafts. Customer service was a dream and thats why Tom Woods drive shafts are the BEST in the world.

Great work Tom.
JK07 is offline   Quick reply to this message
Old 12-30-2011, 07:38 PM   #79
616fun
Granite Guru
 
616fun's Avatar
 
Join Date: Nov 2011
Member # 18209
Location: Indianapolis, IN
Posts: 436
Garage
Feedback: 1 reviews



Just finished getting my front shaft in.

Holy crap that front pinion nut can suck it!! I finally put a breaker bar on it and had my wife back up slowly while I kept an eye on everything. Let the Jeep work for me. Other than that a nice clean install.

Thanks for the rebate Tom. Considering I blew my shaft out at TW holidays everything helps!!!

Last edited by 616fun; 12-30-2011 at 07:41 PM.
616fun is offline   Quick reply to this message
Old 12-31-2011, 06:02 PM   #80
fftri
Wheeler
 
fftri's Avatar
 
Join Date: Jan 2009
Member # 3197
Posts: 52
Feedback: 0 reviews
I ground down part of my rear shaft on a rock today.
Realized too late I was hung up on driveshaft. Damage was done.
I will be ordering a Woody to match my front.

__________________
08 Unlimited born 1/08
Flame Red, Dual Tops
3.5" Clayton Lift
35" Cooper Discovery STs Cragar Soft 8s
5:38s, ARBs F/R, RCVs 35 spline front axle,
Nitto rear 35 spline axle
ProRock 44
Shrokworks sliders
Clayton Offroad skids/crossmember
Tom Woods F/R driveshafts
Mr Fister Fab Front Bumper
VIAR OBA
fftri is offline   Quick reply to this message
Old 01-06-2012, 06:19 PM   #81
damon.l
Rock doG
 
damon.l's Avatar
 
Join Date: Sep 2011
Member # 17510
Location: s/e texas
Age: 34
Posts: 1,785
Feedback: 0 reviews
i know tom doesnt post here often, but thats cool because this is more of a lookie-loo kinda question. i dont want to email him and bother him as he seems to stay pretty busy.

are all of his shafts built for a specific lift height? i ask because other brands will say from 3-6'' lift or something of the like.

my plan is to replace shafts as i have money while i currently have my 2.5 lift before i go bigger.
damon.l is offline   Quick reply to this message
Old 01-06-2012, 06:27 PM   #82
616fun
Granite Guru
 
616fun's Avatar
 
Join Date: Nov 2011
Member # 18209
Location: Indianapolis, IN
Posts: 436
Garage
Feedback: 1 reviews
Quote:
Originally Posted by damon.l View Post
i know tom doesnt post here often, but thats cool because this is more of a lookie-loo kinda question. i dont want to email him and bother him as he seems to stay pretty busy.

are all of his shafts built for a specific lift height? i ask because other brands will say from 3-6'' lift or something of the like.

my plan is to replace shafts as i have money while i currently have my 2.5 lift before i go bigger.
http://www.4xshaft.com/MeasuringGuide.pdf

Yep. They are.
616fun is offline   Quick reply to this message
Old 01-13-2012, 06:44 PM   #83
flyingbrian
Granite Guru
 
flyingbrian's Avatar
 
Join Date: Feb 2010
Member # 7957
Location: Loganville,GA
Age: 45
Posts: 179
Feedback: 0 reviews
Just placed the order today for a front DS..
flyingbrian is offline   Quick reply to this message
Old 01-14-2012, 04:04 PM   #84
fftri
Wheeler
 
fftri's Avatar
 
Join Date: Jan 2009
Member # 3197
Posts: 52
Feedback: 0 reviews
Got the rear driveshaft installed Wed night.
OEM was a PITA to get off at the rear flange, but after that everything went smoothly. No more vibes!
Two thumbs up for Tom Woods shafts!
__________________
08 Unlimited born 1/08
Flame Red, Dual Tops
3.5" Clayton Lift
35" Cooper Discovery STs Cragar Soft 8s
5:38s, ARBs F/R, RCVs 35 spline front axle,
Nitto rear 35 spline axle
ProRock 44
Shrokworks sliders
Clayton Offroad skids/crossmember
Tom Woods F/R driveshafts
Mr Fister Fab Front Bumper
VIAR OBA
fftri is offline   Quick reply to this message
Old 02-04-2012, 06:40 PM   #85
flyingbrian
Granite Guru
 
flyingbrian's Avatar
 
Join Date: Feb 2010
Member # 7957
Location: Loganville,GA
Age: 45
Posts: 179
Feedback: 0 reviews
I just installed my new front TW DS. why are the other forums bashing the gold seal U-joints?? am I missing something? was told to upgrade to spicer and I would be fine..

can someone clarify for me?

Thanks
flyingbrian is offline   Quick reply to this message
Old 02-04-2012, 07:43 PM   #86
GreenJK
Granite Guru
 
Join Date: Nov 2009
Member # 6997
Location: Colorado
Posts: 408
Feedback: 0 reviews
It seems to be a personal vendetta based around a vendor choosing not to sponsor that site.

The bottom line is that Tom chose not to line Eddy's (wayoflife) pockets, so wol chose to trash Tom's products. Unfortunately, there are people jumping on the Wol bandwagon and spreading the rumor, even though they have no personal experience, and pretty much anyone who posts in favor of Woods driveshafts gets ridiculed or just flat out banned. You will notice that the other vendors on that site don't even have the balls to post, even though a good number of them buy, sell, and use Woods products. It really is too bad that they choose to stay silent.
GreenJK is offline   Quick reply to this message
Old 02-06-2012, 09:38 AM   #87
flyingbrian
Granite Guru
 
flyingbrian's Avatar
 
Join Date: Feb 2010
Member # 7957
Location: Loganville,GA
Age: 45
Posts: 179
Feedback: 0 reviews
I was trolled after posting ...by Eddie and a moderator...LMAO

sent from my Droid Incredible using Tapatalk..
flyingbrian is offline   Quick reply to this message
Old 02-06-2012, 04:25 PM   #88
cru9
Granite Guru
 
cru9's Avatar
 
Join Date: Jan 2011
Member # 13211
Location: Marietta, Ga
Age: 42
Posts: 323
Feedback: 1 reviews
What kind of price are the fron Tom Woods DS for a JKU automatic? Do they come with yokes or factory style flanges?
cru9 is offline   Quick reply to this message
Old 02-06-2012, 07:29 PM   #89
616fun
Granite Guru
 
616fun's Avatar
 
Join Date: Nov 2011
Member # 18209
Location: Indianapolis, IN
Posts: 436
Garage
Feedback: 1 reviews
Quote:
Originally Posted by cru9 View Post
What kind of price are the fron Tom Woods DS for a JKU automatic? Do they come with yokes or factory style flanges?
$459 for the shaft. For a front it's yoke on the t-case, flange on the axle. Everything you need to know us on Tom's site. Click on the JK link:

http://4xshaft.com/
616fun is offline   Quick reply to this message
Old 02-17-2012, 05:40 PM   #90
AREA 13
Wheeler
 
AREA 13's Avatar
 
Join Date: Nov 2008
Member # 2337
Location: Towson,MD
Age: 45
Posts: 23
Feedback: 0 reviews
ordered mine yesterday through Adams jeep. gotta see if i can get that 40.00 discount!

Last edited by AREA 13; 02-17-2012 at 05:46 PM.
AREA 13 is offline   Quick reply to this message
Old 03-02-2012, 02:45 PM   #91
XXXXXXXXXX4LCKD10RUBIUNLTD
Guest
 
Join Date: Jun 2010
Member # 9703
Location: Kaneohe, Hawaii
Posts: 870
Feedback: 5 reviews
Just sent a email regarding the $40.00 gift certificate. Will be ordering a front shaft as soon as I receive the certificate. Tore the boot on the front shaft
XXXXXXXXXX4LCKD10RUBIUNLTD is offline   Quick reply to this message
Old 03-06-2012, 03:43 PM   #92
AussieLaz
Newbie
 
Join Date: Mar 2012
Member # 20401
Age: 44
Posts: 2
Feedback: 0 reviews
I have nothing but praise for Tom - his customer service & product is simply excellent.

1350 & 1310 for a JKU CRD + 1310? rear for the TJ
AussieLaz is offline   Quick reply to this message
Old 03-07-2012, 06:16 PM   #93
AZMyke
Granite Guru
 
AZMyke's Avatar
 
Join Date: Jun 2010
Member # 10004
Location: Mesa
Age: 55
Posts: 145
Feedback: 0 reviews
I have a 2012 JKU Rubicon I haven't lifted yet, but I'll probably go to a 3" or 4" TF lift ... can I change the drive shafts while stocked and have no problem with the lift? Is there any extension of the DS when lifting? Thanks.
__________________
2012 JKU Flame Red Rubicon (aka: Freedom)
24yrs Air Force Retired
Harley Driver (07RK)
AZMyke is offline   Quick reply to this message
Old 03-08-2012, 04:10 AM   #94
616fun
Granite Guru
 
616fun's Avatar
 
Join Date: Nov 2011
Member # 18209
Location: Indianapolis, IN
Posts: 436
Garage
Feedback: 1 reviews
Quote:
Originally Posted by AZMyke View Post
I have a 2012 JKU Rubicon I haven't lifted yet, but I'll probably go to a 3" or 4" TF lift ... can I change the drive shafts while stocked and have no problem with the lift? Is there any extension of the DS when lifting? Thanks.
At a stock stance you should be fine with your stock shaft. Shafts are cut to accommodate the lift. You can add some extra length to grow , but I think there are limits to doing that.

Best bet is to call Tom and talk to him about your plans. He'll walk you through what you need.
616fun is offline   Quick reply to this message
Old 03-08-2012, 06:48 AM   #95
AZMyke
Granite Guru
 
AZMyke's Avatar
 
Join Date: Jun 2010
Member # 10004
Location: Mesa
Age: 55
Posts: 145
Feedback: 0 reviews
Thanks for that info ... I will give him a call.
__________________
2012 JKU Flame Red Rubicon (aka: Freedom)
24yrs Air Force Retired
Harley Driver (07RK)
AZMyke is offline   Quick reply to this message
Sponsored Links
Advertisement
 
 

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the JKowners.com : Jeep Wrangler JK Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 06:06 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.