Jeep (Interior) Jerry Can Mount - JKowners.com : Jeep Wrangler JK Forum
 
LinkBack Thread Tools Display Modes
post #1 of 11 Old 01-10-2011, 02:55 PM Thread Starter
Rock God
 
JeepingGreen's Avatar
 
Join Date: Jun 2010
Location: Redwood City, CA
Posts: 933
Garage
Feedback: 0 reviews
Jeep (Interior) Jerry Can Mount

Looking for some ideas on how to (securely) mount a Jerry can inside my Jeep. Ultimately, I will be adding a rear bumper/tire carrier and it will have the Jerry Can mounts installed, but until then, I'm looking for a quick/cheap/convenient method of mounting a Jerry can inside my Jeep.

Ya, ya, I know - gas vapor is flammable, not a great idea, etc.. I realize all that - so please spare me that particular advice.

I had seen people mount one along the side in the back, using the roll bars but I'm not sure exactly what it involved.

Any ideas?

~JG


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
JeepingGreen is offline  
Sponsored Links
Advertisement
 
post #2 of 11 Old 01-10-2011, 03:27 PM
Administrator
 
HITMONEY's Avatar
 
Join Date: Jan 2008
Location: Sothern Utah
Age: 45
Posts: 8,740
Garage
Feedback: 5 reviews

Quote:
Originally Posted by JeepingGreen View Post
Looking for some ideas on how to (securely) mount a Jerry can inside my Jeep. Ultimately, I will be adding a rear bumper/tire carrier and it will have the Jerry Can mounts installed, but until then, I'm looking for a quick/cheap/convenient method of mounting a Jerry can inside my Jeep.

Ya, ya, I know - gas vapor is flammable, not a great idea, etc.. I realize all that - so please spare me that particular advice.

I had seen people mount one along the side in the back, using the roll bars but I'm not sure exactly what it involved.

Any ideas?

~JG
I think right next to the cigarette light would work..


In all seriousness, do a search here on JKO for "Rotopax". I think you could make that work.

°lllll°


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


Facebook Page
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

YouTube Channel
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
HITMONEY is offline  
post #3 of 11 Old 01-11-2011, 07:54 AM Thread Starter
Rock God
 
JeepingGreen's Avatar
 
Join Date: Jun 2010
Location: Redwood City, CA
Posts: 933
Garage
Feedback: 0 reviews

Quote:
Originally Posted by HITMONEY View Post
I think right next to the cigarette light would work..


In all seriousness, do a search here on JKO for "Rotopax". I think you could make that work.
The Rotopax are pretty cool.. I might invest in some of those for water (would be neater and easier than my 5 gallon "glug glug" jug). For the gas, I think I'm just going to bungee in a 5 gallon plastic can or Jerry can.. I will likely use the gas on the trail as soon as I can (as soon as I've burned up 5 gallons from my tank) - it's just to give me a little extra padding.

I had seen a few people do something along the side rear window, using their roll bar as a brace but that was a 4-door with the angled bar in the back - don't think my 2-door would line up the same. I'm looking at the far-back-passenger side corner - would like to create a little "platform" that would maybe use the top/side of the body and the roll bar. So the bottom of the Jerry Can would sit at the level of the top of the rear door/gate. I have a soft top, so the body is exposed there and it seems like I should be able to work something out..


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
JeepingGreen is offline  
post #4 of 11 Old 01-11-2011, 03:29 PM
TrailDuty.com
 
PhilD's Avatar
 
Join Date: Sep 2007
Location: Texas
Posts: 5,205
Feedback: 5 reviews

Maybe one of these would work, if you could find somewhere to mount it:

http://www.trailduty.com/product_inf...roducts_id=636

PhilD is offline  
post #5 of 11 Old 01-11-2011, 03:40 PM
JKowners Vendor
 
REBEL OFFROAD's Avatar
 
Join Date: Mar 2010
Location: We Supply the USA from So Cal
Posts: 2,477
Feedback: 6 reviews

I vote Rotopax.

Rebel Off Road // Bond Gilmer, President
Toll Free: 866-900-8841
Email:
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

HQ:
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

CONSULT. BUILD. DELIVER.
REBEL OFFROAD is offline  
post #6 of 11 Old 01-11-2011, 03:43 PM Thread Starter
Rock God
 
JeepingGreen's Avatar
 
Join Date: Jun 2010
Location: Redwood City, CA
Posts: 933
Garage
Feedback: 0 reviews

Quote:
Originally Posted by PhilD View Post
Maybe one of these would work, if you could find somewhere to mount it:

http://www.trailduty.com/product_inf...roducts_id=636

That would be perfect - if I could find a way to (securely) mount it to my roll bar...


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
JeepingGreen is offline  
post #7 of 11 Old 01-12-2011, 03:57 AM
Rock God
 
b1pig's Avatar
 
Join Date: Jan 2008
Location: ray city, ga
Posts: 1,197
Feedback: 1 reviews
Send a message via MSN to b1pig

i'm pretty sure that you could use flat stock welded to exhaust clamps to mount the pictured mount to.


theres enough space between he 4 side mounting holes on the jerry can mount that (using two pieces of flat stock bolted horizontally) the angle of the rear part of the roll bar could be compensated for. i'd just weld the flat stock to the back-side of the clamps.

one thing.
have you even held a jerry can up to the rollbar to see if the height is even practical enough? i'm not sure that it is.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

'15 Ram 1500
2008 Kawasaki KLR650
needed: boat and plane
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
b1pig is offline  
post #8 of 11 Old 01-12-2011, 08:34 AM Thread Starter
Rock God
 
JeepingGreen's Avatar
 
Join Date: Jun 2010
Location: Redwood City, CA
Posts: 933
Garage
Feedback: 0 reviews

Quote:
Originally Posted by b1pig View Post
i'm pretty sure that you could use flat stock welded to exhaust clamps to mount the pictured mount to.


theres enough space between he 4 side mounting holes on the jerry can mount that (using two pieces of flat stock bolted horizontally) the angle of the rear part of the roll bar could be compensated for. i'd just weld the flat stock to the back-side of the clamps.

one thing.
have you even held a jerry can up to the rollbar to see if the height is even practical enough? i'm not sure that it is.
I haven't done any preliminary "fitting" yet. I was hoping to see some examples of it first - namely because I don't want to drop $60-$99 on a nice Jerry can if I can't properly secure it (it would just get all banged up). I think for now I'll just plan on the quick and dirty alternative - a plastic 5 Gallon Jug and bungee the hell out of it (until I can ultimately get a bumper/tire carrier with Jerry can mounts, etc.). I'm a bit strapped on cash and there's a hefty list of things I could spend the $$ on. Namely, tire deflators and a portable compressor.

~JG


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
JeepingGreen is offline  
post #9 of 11 Old 01-13-2011, 08:21 AM
JKO Addict!
 
fourplyn's Avatar
 
Join Date: Jul 2009
Location: Littleton, Colorado
Age: 42
Posts: 3,349
Feedback: 1 reviews

Um, I'm pretty sure, legally or healthly....that you don't want to mount a gas can of any kind inside the vehicle..With out venting it to the exterior.

Check out Outlaw Offroad's bad ass rear hardtop window mount rotopax.. pretty killer idea I think..and it doesn't take up an ounce of space.

Current project jeep 08' wrangler 2dr
Past jeep:
- 07' Rubicon 4 dr, RAMICON- 3.5" ROCK KRAWLER Coil-Over lift
- 5.38 gears- Gusseted/Trussed/inner sleeved
- 40" Pro Comp X-Terrain

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
fourplyn is offline  
post #10 of 11 Old 01-13-2011, 08:30 AM
Rock God
 
RDM Offroad's Avatar
 
Join Date: Feb 2009
Location: Glendora, Ca
Posts: 1,193
Feedback: 3 reviews

Quote:
Originally Posted by JeepingGreen View Post
That would be perfect - if I could find a way to (securely) mount it to my roll bar...

http://www.rdmoffroad.com/Fourtreks-...lel-Mount.aspx

or


http://www.rdmoffroad.com/Fourtreks-...lar-Mount.aspx

with


http://www.rdmoffroad.com/blitz-metalgascancarrier.aspx

&


http://www.rdmoffroad.com/blitz-5gal...lusgascan.aspx

JKOWNERS Member Discount Available at:

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Click the link to automatically apply the current offer!

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Follow us on:
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
RDM Offroad is offline  
post #11 of 11 Old 01-13-2011, 09:23 AM Thread Starter
Rock God
 
JeepingGreen's Avatar
 
Join Date: Jun 2010
Location: Redwood City, CA
Posts: 933
Garage
Feedback: 0 reviews

Quote:
Originally Posted by fourplyn View Post
Um, I'm pretty sure, legally or healthly....that you don't want to mount a gas can of any kind inside the vehicle..With out venting it to the exterior.

Check out Outlaw Offroad's bad ass rear hardtop window mount rotopax.. pretty killer idea I think..and it doesn't take up an ounce of space.
Hehe, both are good points.. I'll have the top down and it would just be for a few hours (before, so I'm not too worried about the fumes. The rotopax are pretty cool. I saw the rear (and side) window mounts but I have a soft top. Also, I like being able to see out the back. Still a great idea, though..


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
JeepingGreen is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the JKowners.com : Jeep Wrangler JK Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome