Olympic has a new front bumper available [Archive] - JKowners.com : Jeep Wrangler JK Forum

: Olympic has a new front bumper available

11-30-2007, 01:47 PM
Just noticed a new front bumper by Olympic on 4WD.com. It's called the "Rescue Bumper" and the price looks nice. One thing I'm not so keen on is the reflectors. Looks like poor-man's lights. They say that they'll have the ability to install the stock fog lights in the future. Also, there are no d-ring mounts. I like the minimalist design though.



11-30-2007, 02:31 PM
I like the price and the overall design, but like you, do not like the reflectors. If they were lights it'd be a winner.

As for the lack of D-Rings next time you see a H2 or H3 in a parking lot take a good look at the OEM D-Rings they have. The bolt spacing looks similar and with a little modification they MAY match right with those four bolts. Hmmmm... :smokin:

12-01-2007, 03:31 PM
got olympic has got to have the stupidest engineers out there

other then the products being butt ugly they now decided to have reflectors on the front bumpers??

12-03-2007, 10:09 AM
I like stubby bumpers but that is TOO stubby.

Having a plain square end delete like that looks cheap.

12-03-2007, 10:54 PM
Simple and inexpensive, I like it! Other than the reflectors on it I think it's a nice option for the minimalist look. I'd put some d-ring attachment points on it to finish it off.

12-06-2007, 07:25 AM
I'm guessing that those bolts are going right to the frame mounts so the spacing would be the same as the oem hooks or the PJ bolt-on shackle mounts.


09-19-2008, 07:08 PM
I got this bumper this summer and like it very much, 1/4 inch plate VS 3/16 of many others and I swapped in blue lens , I have a Mile Marker SE 9500 winch and had to customize the solenoid mount to fit the hoop, a intregal solenoid would have been a better choice(the winches w/ solenoid over the spool) I used my stock tow hooks inverted, couldn't scrape up the 90 frogskins for PureJeeps bolt-on D ring mounts. see pics on my profile.

09-25-2008, 03:52 PM
1/4 inch plate VS 3/16.

overkill IMO

09-25-2008, 04:43 PM
It all comes down to price, how much is this thing?