Finishlinewest "Stonehenge Series" Sliders [Archive] - JKowners.com : Jeep Wrangler JK Forum

: Finishlinewest "Stonehenge Series" Sliders


finishlinewest
02-05-2009, 06:22 AM
Made from 1.5" 120 wall ESW tubing, these sliders are sold as a weld-it-yourself design. They come with 3 inner supports that are already tacked in place. You can also opt to ship/drop-off or wait while we install yours at our facility.

The "Stonehenge Series" Sliders are $175.00 raw plus shipping or if you are local you can pick up from us.

Should you choose to have us install them the total is $275.00.

For more information and to order yours today please call us at 760-885-6054 or e-mail us at finishlinewestinc@gmail.com

Andy

http://finishlinewest.smugmug.com/photos/468042237_UzBd7-XL.jpg

http://finishlinewest.smugmug.com/photos/468042184_3xuvw-XL.jpg

http://finishlinewest.smugmug.com/photos/468042153_DcCXR-XL.jpg

PKDailey4
02-05-2009, 08:28 AM
By the looks of those dents and scratches in your body, Why bother ?

Dr.Dirty
02-05-2009, 08:34 AM
By the looks of those dents and scratches in your body, Why bother ?

He doesnt have any dents or scratched yet lol :thefinger: he will soon enuff :grinpimp: we went out in the dez yesterday and thats just all the dust and redneck pinstriping

finishlinewest
02-05-2009, 08:43 AM
By the looks of those dents and scratches in your body, Why bother ?

What dents? its called dirt and dust. :shaking:

PKDailey4
02-05-2009, 09:20 AM
What dents? its called dirt and dust. :shaking:

"oh'' ''Pardemwa''

finishlinewest
02-05-2009, 10:46 AM
"oh'' ''Pardemwa''

:grinpimp:

txlopes
02-06-2009, 07:42 AM
did you just add the tubing to the rubicon rails? i could do that. looks good.

RoCk-NeSs MoNsTeR
02-06-2009, 07:45 AM
I just gotta ask, why not use DOM?

Dr.Dirty
02-06-2009, 09:10 AM
being that they mount right to the body i think the extra cost of DOM would not be worth it we have made many sets of these out of .120 wall and beat the hell out of them and they are fine

usmcdoc14
02-06-2009, 04:52 PM
I just gotta ask, why not use DOM?

waste of good product on a non-structural piece.

RoCk-NeSs MoNsTeR
02-06-2009, 04:58 PM
The last set of sliders I saw made of .129 wall were on my buds Toy and they bent to ka-ka from rocks. That's why I asked.

09JK
02-09-2009, 10:06 AM
Any problems with the added weight of the bars and also a persons weight (if using as a step) being to much for the body mounts ?

finishlinewest
02-09-2009, 10:37 AM
There isnt too much difference in the DOM vs the ESW as it isnt a structural part. as far as testing goes we have about 6 sets out now and no one has had a single problem with them.

As far as using them as steps i weigh 260 and can jump up and down on them with no problem. Dr.Dirty has placed the full weight of his jeep up against some nasty rocks and other than taking the pint off them and putting a few gouges in the metal we haven't had a single failure.

09JK
02-09-2009, 11:34 AM
I have yet to mount them but I bought a set from Mohave Green that look very similiar to yours. He called them Dirty Fab sliders. Dont know if its possibly your work or Dr Dirty's or just a copy but they sure seam to be good quality.

Dr.Dirty
02-09-2009, 11:39 AM
yes sir they were made by me wich now have been changed to the "Stonehenge Series"

09JK
02-09-2009, 12:03 PM
Nice work :beer::beer::beer:

Dr.Dirty
02-09-2009, 12:08 PM
The last set of sliders I saw made of .129 wall were on my buds Toy and they bent to ka-ka from rocks. That's why I asked.

nope i have beat the hell out of them and no dents or bends these are now on Socalrubi's jeep and im sure he could verify that they help up quite nicely :)

http://i7.photobucket.com/albums/y268/szmartin7401/jeep/100_0268.jpg
http://i7.photobucket.com/albums/y268/szmartin7401/jeep/100_0281.jpg
http://i7.photobucket.com/albums/y268/szmartin7401/jeep/100_0262-1.jpg
http://i7.photobucket.com/albums/y268/szmartin7401/jeep/100_0263.jpg

finishlinewest
02-09-2009, 01:14 PM
Yes, Dr.Dirty and I collaborated on these sliders about a year ago, once the decision was made to build and sell more JK parts on the forum we folded it into the Finishlinewest brand.

Dr.Dirty and I have built a few vehicles together and his input is invaluable, unfortunately he has a full time job with pay i cant match yet so until all you martha fockers buy more crap i cant hire him full time yet!! :thefinger:

Seriously though he puts in some tough hours here when he is off work and hopefully soon he'll work here full time.

Andy

RoCk-NeSs MoNsTeR
02-10-2009, 07:22 AM
If I didn't already have a off-road fab shop that I regularly work with, I'd probably buy them. Look good though.