Just finished up Nootherride's Pro-Comp 2.5" lift.....JasonMac, JeepingGreen, and RRauzer came by to help! Came out good, probably got more like 3.25"!

Here's some pics.....
http://184.72.239.143/mu/a6cd8a92-e272-cd70.jpg
http://184.72.239.143/mu/a6cd8a92-e2ab-fefc.jpg
http://184.72.239.143/mu/a6cd8a92-e2e4-9b13.jpg
http://184.72.239.143/mu/a6cd8a92-e307-f49f.jpg
http://184.72.239.143/mu/a6cd8a92-e333-3990.jpg

It was fun. To bad Derek flaked out. He had his mommy call to tell us he was sick.

Hope you feel better buddy.

Looking good!

http://www.jeepcali.com/albums/wrenching-amp-misc/misc-wrenching/procomp-lift-1-08-11-006.jpg

Not sure why Rich is down on all 4's here...
http://www.jeepcali.com/albums/wrenching-amp-misc/misc-wrenching/procomp-lift-1-08-11-007.jpg

http://www.jeepcali.com/albums/wrenching-amp-misc/misc-wrenching/procomp-lift-1-08-11-009.jpg

http://www.jeepcali.com/albums/wrenching-amp-misc/misc-wrenching/procomp-lift-1-08-11-010.jpg

http://www.jeepcali.com/albums/wrenching-amp-misc/misc-wrenching/procomp-lift-1-08-11-014.jpg

http://www.jeepcali.com/albums/wrenching-amp-misc/misc-wrenching/procomp-lift-1-08-11-015.jpg

http://www.jeepcali.com/albums/wrenching-amp-misc/misc-wrenching/procomp-lift-1-08-11-021.jpg

http://www.jeepcali.com/albums/wrenching-amp-misc/misc-wrenching/procomp-lift-1-08-11-027.jpg

http://www.jeepcali.com/albums/wrenching-amp-misc/misc-wrenching/procomp-lift-1-08-11-025.jpg

Is it just me, but the very first photo looks like the spring is compressed even though the jeep didn't look like it was flexing?

some good lookin jeeps out there :beer:

that spring does look really compressed in that pic but im not familiar with the procomp set ups

Is it just me, but the very first photo looks like the spring is compressed even though the jeep didn't look like it was flexing?

My fat butt might. Have been sitting in it:D

It was fun. To bad Derek flaked out. He had his mommy call to tell us he was sick.

Hope you feel better buddy.


The drive home was not bad....thank goodness I don't commute 680 anymore lol...big thanks to Hogg and Jason for the install:beer:

Is it just me, but the very first photo looks like the spring is compressed even though the jeep didn't look like it was flexing?

some good lookin jeeps out there :beer:

that spring does look really compressed in that pic but im not familiar with the procomp set ups

Yeah...I don't know!! That's Procomp for ya!! I just installed it, I don't make it:laughing2::laughing2: I'm a TeraFlex guy! That's what I run....well most of my suspension parts!! Look at the swaybar drop down brackets!! WTF!! Couldn't just include swaybar links with the kit?!

Looks good. Nice use of the fork lift :P

I have never been a fan of Pro Comps Jeep stuff. Their stuff for trucks and such is fine. But I too like Tera Flex :)

Yeah...I don't know!! That's Procomp for ya!! I just installed it, I don't make it:laughing2::laughing2: I'm a TeraFlex guy! That's what I run....well most of my suspension parts!! Look at the swaybar drop down brackets!! WTF!! Couldn't just include swaybar links with the kit?!

Jks track bar front n rear links, sway bar discos...might do brake lines

Still not bad for $250 bucks ! Looks good rides good off road should be really nice... I'm stoked and lifetime warranty on all of it.

It was fun. To bad Derek flaked out. He had his mommy call to tell us he was sick.

Hope you feel better buddy.

Yea, AND you (Derek) missed out on the driveshafts. Now, I'm going to have to charge you a six pack! :D

(Nah, just messing, I'll bring them around again next time.) :beer:

Looks good. Will take a few to break in. I like the new Cutts Hat, Put me on the order please, as long as they are not Trucker hats :)

Looks good!

HOGGSTATUS did you work on your rig??????? are you coming to play in the snow?????

Is it just me, but the very first photo looks like the spring is compressed even though the jeep didn't look like it was flexing?

x2!!!

RC


Yeah...I don't know!! That's Procomp for ya!! I just installed it, I don't make it:laughing2::laughing2: I'm a TeraFlex guy! That's what I run....well most of my suspension parts!! Look at the swaybar drop down brackets!! WTF!! Couldn't just include swaybar links with the kit?!

It appears, that they provided springs that are too long for the lift that was installed, OR the shocks that go with that lift/springs, are not long enough, or need to be replaced, so you have more spring travel.

Just my $0.02.

RC

x2!!!

RC




It appears, that they provided springs that are too long for the lift that was installed, OR the shocks that go with that lift/springs, are not long enough, or need to be replaced, so you have more spring travel.

Just my $0.02.

RC

No that is how they are. I have the same lift. They look as if they smashed, but extend just fine. They have a nice ride to them as well.

No that is how they are. I have the same lift. They look as if they smashed, but extend just fine. They have a nice ride to them as well.

Gotcha. I stand corrected then. :D

RC

Well my mommy made me go to the ER and we were there till 8:00pm but I got some good drugs and two bags of fluid

Well my mommy made me go to the ER and we were there till 8:00pm but I got some good drugs and two bags of fluid

You alright man?

RC

You alright man?

RC

He's fine, he's got some stomach flu.....but NOT ME!! So I'm oncall, I had to call another Tech to take my calls today! I worked from 7:30am to 9:30am on a job yesterday, then back to my shop to do the lift, then had 3 more calls, worked till 2:30 am!! My Back IS FUCKED AND THAT'S AN UNDERSTATEMENT!! I can't get out of bed, if this doesn't go away(which I'm sure it not) I'm going to the hospital myself!! Ofcourse I tell everyone to call me if they need help but I won't call someone to help me! Please don't start trippin out and call me I'll be FINE. TOO! :smokin: Just in a SHIT TON OF PAIN RIGHT NOW!!

I just talked to hogg on the phone and he needs some help. Luckily I gotta good woman to take care of me. I'll be back to work on Tuesday hopefully. Rick if you wanna go over hogg's house with a couple chicks in nurse outfits I'm sure he'd be much obliged.

HOGGSTATUS did you work on your rig??????? are you coming to play in the snow?????

No to both questions, I had to postpone two calls while working on Richard's rig. I wasn't even able to try to install RRauzer's sliders....but Jason looked at them and said it wasn't possible!! The mounts were just off by to much!

Rick if you wanna go over hogg's house with a couple chicks in nurse outfits I'm sure he'd be much obliged.

:laughing2::laughing2:Your HELLA FUNNY Derek!!

HOGGSTATUS did you work on your rig??????? are you coming to play in the snow?????

I'm gonna see what happens but my front brake lines were jacked up by the auto place next to target in Chico....if I can get them fixed get my rears done (not by them:pissed:) retourq everything from the lift and I'm in...but Hopefully I can get it all done if I don't then I'm gonna sit out....

I'm gonna see what happens but my front brake lines were jacked up by the auto place next to target in Chico....if I can get them fixed get my rears done (not by them:pissed:) retourq everything from the lift and I'm in...but Hopefully I can get it all done if I don't then I'm gonna sit out.... I'm a little weary of how tight my front brake lines are tho

He's fine, he's got some stomach flu.....but NOT ME!! So I'm oncall, I had to call another Tech to take my calls today! I worked from 7:30am to 9:30am on a job yesterday, then back to my shop to do the lift, then had 3 more calls, worked till 2:30 am!! My Back IS FUCKED AND THAT'S AN UNDERSTATEMENT!! I can't get out of bed, if this doesn't go away(which I'm sure it not) I'm going to the hospital myself!! Ofcourse I tell everyone to call me if they need help but I won't call someone to help me! Please don't start trippin out and call me I'll be FINE. TOO! :smokin: Just in a SHIT TON OF PAIN RIGHT NOW!!

Hope you feel better man! If you do end up in ER tell em you want a shot of dilotted..fix the pain when I hurt mine

Hope you feel better man! If you do end up in ER tell em you want a shot of dilotted..fix the pain when I hurt mine

I once took dilaudid, I thought it was going to kill me.

Hope you feel better Jeff.

I'm a little weary of how tight my front brake lines are tho

why??? mine still has stock lines with the 4 1/2" lift just have to loosen them in a few spots

why??? mine still has stock lines with the 4 1/2" lift just have to loosen them in a few spots

had my brakes done at a shop in here in chico and there twisted so bad i lost like 2 2.5 inches...im gonna try and get the shop to make it right tommorow:pissed:

x2!!!

RC




It appears, that they provided springs that are too long for the lift that was installed, OR the shocks that go with that lift/springs, are not long enough, or need to be replaced, so you have more spring travel.

Just my $0.02.

RC


Talked to Procomp....so there stupid sway bar relocation brilliance setup is the cause of the tention on the spring....remedy is to add 3inch front links
Anbody got any:D the good news is it doesnt effect the ride at all but offroad articulation is limited by there retarded sway bar setup...