Beat95YJ
10-19-2007, 10:45 AM
Edelbrock Corporation is looking for 2 Jeep Wrangler JK's for shock absorber development.
Edelbrock is looking for a stock height Four Door JK for a shock absorber test fit. This is for our standard height IAS shocks. We have developed tested the shock on a two door and need to ride check a four door. This will typically take 2-3 days and a loaner vehicle is available.
http://www.edelbrock.com/advertising/Part%20Images%20by%20Name%20Web/Shocks/images/Shocks.Horiz2.jpg
Edelbrock is also looking for a 3-4.5" lifted Wrangler JK to develop a reservoir shock application. We will develop lengths and valving for a reservoir application. We will also provide a set of Russell DOT brake hoses for the same application. This type of development typically takes about 2 weeks, and a loaner vehicle is available.
http://www.edelbrock.com/advertising/Part%20Images%20by%20Name%20Web/Shocks/images/reservoir%20shk%20smRGBns.jpg
The vehicle will be returned with the products developed on it. Edelbrock's shock division is located in Torrance, CA near the 405 and Crenshaw. We will be ready for the vehicles after SEMA.
Please PM me if you are interested.
Thank you,
Frank Alioto
Edelbrock Corporation.
Edelbrock is looking for a stock height Four Door JK for a shock absorber test fit. This is for our standard height IAS shocks. We have developed tested the shock on a two door and need to ride check a four door. This will typically take 2-3 days and a loaner vehicle is available.
http://www.edelbrock.com/advertising/Part%20Images%20by%20Name%20Web/Shocks/images/Shocks.Horiz2.jpg
Edelbrock is also looking for a 3-4.5" lifted Wrangler JK to develop a reservoir shock application. We will develop lengths and valving for a reservoir application. We will also provide a set of Russell DOT brake hoses for the same application. This type of development typically takes about 2 weeks, and a loaner vehicle is available.
http://www.edelbrock.com/advertising/Part%20Images%20by%20Name%20Web/Shocks/images/reservoir%20shk%20smRGBns.jpg
The vehicle will be returned with the products developed on it. Edelbrock's shock division is located in Torrance, CA near the 405 and Crenshaw. We will be ready for the vehicles after SEMA.
Please PM me if you are interested.
Thank you,
Frank Alioto
Edelbrock Corporation.