Adding component speakers [Archive] - JKowners.com : Jeep Wrangler JK Forum

: Adding component speakers


SRTpusher
10-17-2008, 08:51 AM
i am adding some new components into the dash as my stock ones didn't like me blasting them at max volume.

how would i wire in the components to the stock deck with no amp?

would i do it this way -

run wire from stock 6.5 to crossover and run dedicated speaker wire from the crossover to the new tweeter and the new 6.5?

or

would i just put the tweeter on the dash and the 6.5 in the lower dash with no crossover?

mcnaught6
10-17-2008, 08:56 AM
you should have a single + and - that went into the factory 6.5. take those and run them into the crossover, then run the tweeter and mid separately out of the crossover.

SRTpusher
10-17-2008, 10:54 PM
you should have a single + and - that went into the factory 6.5. take those and run them into the crossover, then run the tweeter and mid separately out of the crossover.

that would be option A - that is what i thought, i just wanted to make sure...

llh11456
11-17-2008, 08:02 PM
The Runner is a moving, sincere Age of Conan Gold (http://www.mmonice.com/) piece of art. Despite that, most audiences might not have even noticed that it went through the theaters like a desert breeze. It’s made a modest showing internationally, and pulled in $15.4 million in its limited Age of Conan Power Leveling (http://www.mmonice.com/) US release. Critics, however, remained mixed, although most of the negative reviews placed the film up against the poetic genius of its source material ?C the best selling novel by Khaled Hosseini.