High clearance steel tube fenders.
Available in bare steel or with the fine textured Gatorhyde finish.
$999 for a set of four.
Availble in factory width and narrow width
Includes all stainless steel mounting hardware and instructions.
More info at:
www.riverraider.com
http://i307.photobucket.com/albums/nn307/kennyhauk/Moab09074.jpg
http://i307.photobucket.com/albums/nn307/kennyhauk/Moab09083.jpg
http://i307.photobucket.com/albums/nn307/kennyhauk/narrowfender.jpg
http://i307.photobucket.com/albums/nn307/kennyhauk/Narrowfender_1.jpg
http://i307.photobucket.com/albums/nn307/kennyhauk/Moab09077.jpg
http://i307.photobucket.com/albums/nn307/kennyhauk/wheeling215.jpg
http://i307.photobucket.com/albums/nn307/kennyhauk/wheeling214.jpg
http://i307.photobucket.com/albums/nn307/kennyhauk/wheeling233.jpg
http://i307.photobucket.com/albums/nn307/kennyhauk/wheeling085-1.jpg
http://i307.photobucket.com/albums/nn307/kennyhauk/wheeling090.jpg

I don’t like the gator stuff look. How much for bare metal?

If I could afford them I would have them...

Same as superman if i could afford them i would have them but i have to save and firt things first i need a lift kit

I don't like... one slip up and its bent and damaged or damage the body. Plastic fenders can be more forgiving.

Actually the tube fenders will hold up lots better than plastic. I just scraped the crap out of mine and except for the scratch that can be repainted, you cant tell i wacked them. A plastic fender would ahve been ripped off. The tube fender spreads the load over the entire fender so it has more area to absorb the hit. Your puny side is strengthened by the tube fender.

Any idea how wide these are in relation to the OEM flares? I just munched the DS front flare this weekend. :shaking:

They are available in factory width or 2.25'' narrower:)

http://i247.photobucket.com/albums/gg134/greg_hoffner/DSC_0004-1.jpg
http://i247.photobucket.com/albums/gg134/greg_hoffner/DSC_0002-1.jpg
I like ORE version, here is a set with my 38's .

Note this is with a Full Traction (3") Ultimate lift.

those tires look good

Thanks to HUNDY in the for sale section :beer:

Whats the turn around time on the EVO's? I have been hitting Mel up in ref. to the Fox Bumpstop set up and have not heard any response back. Are these fenders on back order? Are they worth 1800$ for front and rears? Thanks for your input.

Whats the turn around time on the EVO's? I have been hitting Mel up in ref. to the Fox Bumpstop set up and have not heard any response back. Are these fenders on back order? Are they worth 1800$ for front and rears? Thanks for your input.

Yes and yes,

but the shipping time to IRAQ you may want to speak to him direct. :smokin:

Last I heard they are ready to ship out.

Puddlz,

What lift do you have on there? It looks great with those fenders and big ass Michelins. The silver looks much better than the two-tone look too.

Bryan.

Puddlz,

What lift do you have on there? It looks great with those fenders and big ass Michelins. The silver looks much better than the two-tone look too.

Bryan.
Hey Brian

I have the Full Traction 3" Ultimate lift.

Wow, only 3"? Those don't look stuffed either. Great job! :beer:

Bryan.

http://i247.photobucket.com/albums/gg134/greg_hoffner/DSC_0004-1.jpg
http://i247.photobucket.com/albums/gg134/greg_hoffner/DSC_0002-1.jpg
I like ORE version, here is a set with my 38's .

Note this is with a Full Traction (3") Ultimate lift.

Got rid of the cop car effect huh? That looks much better ;)

Those tires look TUFF :beer:

I say we go flex that thing...

Puddlz,

Your rig looks awesome. I'm jealous :cool:

Puddlz,

Your rig looks awesome. I'm jealous :cool:
Welcome to the club, :smokin:

You've got the 37's happening

Real nice. Like to see them around the 750.00 range.

http://i307.photobucket.com/albums/nn307/kennyhauk/PAlighter.jpg

http://i307.photobucket.com/albums/nn307/kennyhauk/_MG_1642.jpg

http://i307.photobucket.com/albums/nn307/kennyhauk/JKBuildJKFest053.jpg

http://i307.photobucket.com/albums/nn307/kennyhauk/JKBuildJKFest073.jpg

1/4 panels too ???

We will soon offer our rear tube fenders and our crusher corners as one unit.:beer:

We will soon offer our rear tube fenders and our crusher corners as one unit.:beer:
Morning Sir:beer::beer::beer:

High clearance steel tube fenders.
More info at:
www.riverraider.com
http://i307.photobucket.com/albums/nn307/kennyhauk/wheeling215.jpg
http://i307.photobucket.com/albums/nn307/kennyhauk/wheeling214.jpg
http://i307.photobucket.com/albums/nn307/kennyhauk/wheeling233.jpg
http://i307.photobucket.com/albums/nn307/kennyhauk/wheeling085-1.jpg
http://i307.photobucket.com/albums/nn307/kennyhauk/wheeling090.jpg
Saw these @ the offroad expo in person, great looking to see in person, very impressive job RR.:thefinger:

BUT, your Jeeps need to loose the stickers of you know what I mean.

Damn cheap ass bondo work!:thefinger:

Damn cheap ass bondo work!:thefinger:

TEXAS BONDO, AKA MUD :thefinger:

We will soon offer our rear tube fenders and our crusher corners as one unit.:beer:

Got any available pictures yet? Sounds interesting.

Damn cheap ass bondo work!:thefinger:

We buy our "bondo" in 55 gal. drums from costco.:smokin:

We just don't want anyone to see our welds!;)

http://i307.photobucket.com/albums/nn307/kennyhauk/fenders004.jpg

http://i307.photobucket.com/albums/nn307/kennyhauk/fenders009.jpg

Got any available pictures yet? Sounds interesting.

They best way to do this is to buy the corners and the fenders, install them, tack them together, remove them, then weld them together fully.

We can provide the parts to do this setup.:beer:

2 questions... Do you have a pic from the front of the narrow fenders? and I only see on the webpage that you can buy all 4. What if I only want the front? Can I buy those seperate?

nice fake pics of the welds anyone can photoshop that.

2 questions... Do you have a pic from the front of the narrow fenders? and I only see on the webpage that you can buy all 4. What if I only want the front? Can I buy those seperate?

Yes they can be purchased separately.
Just call me directly and we can get a set out to you.:beer:

http://i307.photobucket.com/albums/nn307/kennyhauk/narrowfender.jpg

http://i307.photobucket.com/albums/nn307/kennyhauk/Narrowfender_1.jpg

are those aftermarket rims in that pic? im trying to see where they would sit with stock rims. i have stock rims with sapcers and 35's, and in PA (as im sur eyou might know) the cops can be asshats sometimes

are those aftermarket rims in that pic? im trying to see where they would sit with stock rims. i have stock rims with sapcers and 35's, and in PA (as im sur eyou might know) the cops can be asshats sometimes

Riiiight, the cops. They have nothing better to do than chase down people whose tires stick out a little beyond the flares. It couldn't be anything else that draws them to you...:shaking:

Those are their welds. They're decent. I wanted to powder coat mine to match my bumpers and they required a few touch ups to correct the undercut/cold-lap at the toes of the welds. I took them to my buddy's shop and we ground a little groove down the seams and re-MIGged em. Longest part was doing the grinding. But now they look show quality.

As a coated or painted product, it would make sense to smooth them out as much as possible. And why not make it cheaper for the consumer. Let me tell you, grinding welds takes a long F'n time compared to doing the welding, and hourly costs are getting factored into that price.

http://i307.photobucket.com/albums/nn307/kennyhauk/fenders009.jpg

Riiiight, the cops. They have nothing better to do than chase down people whose tires stick out a little beyond the flares. It couldn't be anything else that draws them to you...:shaking:


acualy they appear not to, ive been pulled twice for tires sticking out past my flairs, both times i had to put stock tires on and go to the station and both times the cop that was at the station said he had no idea why i was pulled over and the cop that did it was a jerk

those are nice guys....

acualy they appear not to, ive been pulled twice for tires sticking out past my flairs, both times i had to put stock tires on and go to the station and both times the cop that was at the station said he had no idea why i was pulled over and the cop that did it was a jerk

lol. I've been stopped before and was asked about my tires, but I was stopped for something else...

Also, I've been a cop for 8 years now and have never stopped anyone for it. There is always much better reasons if I do, then it's just something to add. Same goes for pretty much everyone I ever have worked with.

Sure there was nothing else...?:innocent:

the first time he told me the reason he pulled me over was because he saw my tires sticking out further than my fenders second time he said my jeep looked to big and wanted to measure the bumper height then said the tires stuck out to far also, but i never actually got a ticket for that stuff igot a ticket for my registration not matching my insurance address

the first time he told me the reason he pulled me over was because he saw my tires sticking out further than my fenders second time he said my jeep looked to big and wanted to measure the bumper height then said the tires stuck out to far also, but i never actually got a ticket for that stuff igot a ticket for my registration not matching my insurance address


Maybe his wife or girlfriend left him for a guy in a lifted Jeep!!:D

Maybe his wife or girlfriend left him for a guy in a lifted Jeep!!:D

lol. That's got to be it! :laughing::laughing:

They best way to do this is to buy the corners and the fenders, install them, tack them together, remove them, then weld them together fully.

We can provide the parts to do this setup.:beer:


no welder:bawling:

Added to my list of future mods!

RR - we're doing an Easter weekend run at RC, would love to see you out there - would be a great opp. to show off some of your products!!

Oh by the way, for anyone who is interested, wheeling at RC Easter weekend - I'll be there Fri morning through Sun afternoon - would love to meet some more fellow JK'ers!!!

JD

Would love to join you, however we will be attending the easter jeep safari in Moab that weekend. Let me know the next time your going up and we will be there.:beer:

Would love to join you, however we will be attending the easter jeep safari in Moab that weekend. Let me know the next time your going up and we will be there.:beer:

Make sure you say hi to your best bud while he is walking around taking pictures of chit. :devil::devil:

60 full sets of fenders and still going strong!
Thanks everyone!:beer:
Fenders in stock and ready to ship!:smokin:

http://i307.photobucket.com/albums/nn307/kennyhauk/Moab09052.jpg

http://i307.photobucket.com/albums/nn307/kennyhauk/Moab09083.jpg

Im from Pa, small western part of a town, know a few of the tire watchers, and I get pulled over for my Zenons, not the narrow, the wide ones, you know as wide as the stockers...

Im sure it was a new cop trying to save the world one wide flare at a time...

I took my stock flares to the cop shop, handed the level headed officer a tape measure and said, "what do I do"? His reply- "nothing" and signed off on it...

2 weeks later 1st cop pulles me back over, flips on me, and by the time we are done he has his camera out and calling Harrisburg. Ive never seen anyone so JACKED... His ears were red and everything, but I know if I put those narrow flares on, he'd be all over me...

I think the hair on the camels back was, its Friday night @ 2:30 and you cant find a real criminal? Yeah, thats probably it...

Dont even want to know about my front bumper... thats a whole other story... same bat cop, same bat channel...

Whats the military discount on a set of those puppies for an old boy that grew up in st. thomas/shippensburg? What i'd give to talk the old lady into a set of those

Im from Pa, small western part of a town, know a few of the tire watchers, and I get pulled over for my Zenons, not the narrow, the wide ones, you know as wide as the stockers...

Im sure it was a new cop trying to save the world one wide flare at a time...

I took my stock flares to the cop shop, handed the level headed officer a tape measure and said, "what do I do"? His reply- "nothing" and signed off on it...

2 weeks later 1st cop pulles me back over, flips on me, and by the time we are done he has his camera out and calling Harrisburg. Ive never seen anyone so JACKED... His ears were red and everything, but I know if I put those narrow flares on, he'd be all over me...

I think the hair on the camels back was, its Friday night @ 2:30 and you cant find a real criminal? Yeah, thats probably it...

Dont even want to know about my front bumper... thats a whole other story... same bat cop, same bat channel...

Cop has got it bad for you. Maybe make a second trip to the station and file a complaint against him (if you are within the law). Supervisor has to follow-up and it will stay in his file. If things escalate down the road you have some ground to stand on. See if any of your local buddies have had similiar run-ins and have them do the same.

I saw these a Jeep Safari. They made everything else look positively amateurish.:smokin:

Kenny makes some sick stuff,and he produces it too:D

I saw these a Jeep Safari. They made everything else look positively amateurish.:smokin:

Thanks for the positive feed back!

It looks like Mickey likes'em too!
http://i307.photobucket.com/albums/nn307/kennyhauk/Truckfest2009006.jpg

That looks awesome!

Great stuff, do you offer a bare metal though and not the gator finish?

Unless you're a welder make sure you have him leave the weld bead on. If they grind it flush it'll leave a bunch of undercut. Is just a visual flaw in regards to something like fenders. Mostly due to MIG welding thin-to-thick materials together.

I got mine plain metal and repaired the undercut myself and now they look perfect. They probably would have looked just as good if I had got them to not grind the bead down.

Great stuff, do you offer a bare metal though and not the gator finish?

Yes we ship them out in bare steel every week:beer:

Sigh. If only they said, "Please don't pull me over for having skinny fenders Mr. Didn't-Get-Any-This-Week-Statie-Man," on them...

Sigh. If only they said, "Please don't pull me over for having skinny fenders Mr. Didn't-Get-Any-This-Week-Statie-Man," on them...

Just avoid the man by taking the back roads....they are more fun anyway!:D
http://i307.photobucket.com/albums/nn307/kennyhauk/PA114521.jpg

Kenny, thanks for all the info over the phone, look forward to strategizing phase II of SAS using some of your products.

Kenny, thanks for all the info over the phone, look forward to strategizing phase II of SAS using some of your products.

That's one of the cool things about Kenny, he is very knowledgeable and take the time to talk to you to make sure you understand. I had to go over some stuff with him about the Crusher Corner install and he basically walked me through it.

yeah i helped out installing a set on Bunkers jeep and like them. any way i could get a set with out the curved drop down on the front? i prefer the flat fender look.