Tube Fenders & 1/4 panels are on [Archive] - JKowners.com : Jeep Wrangler JK Forum

: Tube Fenders & 1/4 panels are on


PUDDLZ
06-08-2008, 12:26 PM
Check out the pic's on the web sight http://www.offroadevolution.com/


These are pic's of my ride, the proto type set is on my ride with body armor and sliders installed.

seer
06-08-2008, 12:40 PM
What do the rear ones look like?

RotorHead
06-08-2008, 04:34 PM
Awesome Puddlz. I love them. I already told you that though. :beer:

rockcrawl
06-08-2008, 04:43 PM
Looks amazing. I would love to do something like this to mine some day but $$$$$ stands in the way.

a plumber
06-08-2008, 05:16 PM
What do the rear ones look like?

x2!

SDMF
06-08-2008, 08:28 PM
I have seen them in person, and I have to say that if I had the coin my jeep would be on the list waiting for these.

venom
06-08-2008, 08:43 PM
wow, wish I were out that way!
they have some pretty innovative stuff and $1200 installed for a regear is awesome!
everywhere here wants around 2 grand

PUDDLZ
06-08-2008, 09:21 PM
Mel has people coming in from as far as Arizona & Utah .

He is a very knowledgeable person,

He set my JK up with one of the first sets of 5:13's, Chromoly shafts, & the drive lines with not one issue, make a vacation of it, and get r done in one trip too.

PUDDLZ
06-08-2008, 09:31 PM
Ok

Here are a few Pic's
http://i247.photobucket.com/albums/gg134/greg_hoffner/ORE%20PICS/DSC_0002.jpg
http://i247.photobucket.com/albums/gg134/greg_hoffner/ORE%20PICS/DSC_0001.jpg
http://i247.photobucket.com/albums/gg134/greg_hoffner/ORE%20PICS/DSC_0004.jpg
http://i247.photobucket.com/albums/gg134/greg_hoffner/ORE%20PICS/DSC_0005.jpg
http://i247.photobucket.com/albums/gg134/greg_hoffner/ORE%20PICS/DSC_0007.jpg
Hopefully these came out OK :blush2:
Body armor, front & rear panels,& sliders are all from ORE

venom
06-08-2008, 09:35 PM
Mel has people coming in from as far as Arizona & Utah .
make a vacation of it, and get r done in one trip too.
I thought the exact same thing but 3600 miles round trip is a bit too much to save $800

Ruskin
06-09-2008, 06:40 AM
Body armor, front & rear panels,& sliders are all from ORE[/quote]

Wow, that all looks great. I really like the rear panel full coverage and flat/recessed light. The whole thing is very clean.

The reason for all the armor is protection, right? So how tough are the fender flares? Are they reinforced (is that necessary with amount of flat sheet metal it's welded to)?

Here's my quick scale of toughness:

Can I use them to pivot around a tree?
What about a soft flop on the side?
What about a rought hit on the rocks?
Yes, very subjective, but I've seen pics of PUDDLZ wheeling, so I would appreciate his opinion.

RotorHead
06-09-2008, 10:27 AM
ORE posted some pictures on the other site where they came off a ledge at Moab and side flopped into another rock face. It slammed the whole side of the Jeep and the only damage was a busted mirror and a little paint off of the fenders.

These things are awesome tuff. The are very pricey and shipping will be a lot, but there's nothing even close out there right now.

Kudos to Offroad Evolution. I just hope to be able to afford a set of these one day soon.

SDMF
06-09-2008, 11:03 AM
The red Optima jeep flopped in Moab, I saw it after the flop, and they seemed to really take it. The only damage I saw was the windshield frame was a little dented and the fenders were scratched.

RotorHead
06-09-2008, 12:23 PM
The red Optima jeep flopped in Moab, I saw it after the flop, and they seemed to really take it. The only damage I saw was the windshield frame was a little dented and the fenders were scratched.

Yeah, that's the one.

Rollbar13
06-09-2008, 01:39 PM
damn those look nice...I'm with SDMF, if I had the cash those would be on my Jeep in a hurry...

PUDDLZ
06-09-2008, 03:10 PM
I have yet to smash them up as bad as the OPTIMA JK ,

Take it back, Holly Molly racing (George) put his to a test @ TDS 2008 I heard @ 75MPH roll and most damage was to the stock body parts.

JR
06-09-2008, 04:32 PM
What do the rears look like at the back corner from the top view?

RotorHead
06-09-2008, 05:42 PM
I have yet to smash them up as bad as the OPTIMA JK ,

Take it back, Holly Molly racing (George) put his to a test @ TDS 2008 I heard @ 75MPH roll and most damage was to the stock body parts.

Didn't hear about that. Was it recently?

MOJAVEGREEN
06-10-2008, 09:32 PM
one day my jk will be as cool as Puddlz is!:bawling: i just need a damn job! lets start up a band of do-good mercenaries:mr-t::beer:

seer
06-10-2008, 10:44 PM
Some questions:
The rear quarters come with the lights, right?
Are the front and rears dependent on the sliders for structural strength?
Do these screw on, or rivet?
And... how did you know I just ripped up my left rear fender last weekend and had a tail light stolen the week before?
Are you guys psychic or something?

MOJAVEGREEN
06-11-2008, 12:54 AM
Ok

Here are a few Pic's
http://i247.photobucket.com/albums/gg134/greg_hoffner/ORE%20PICS/DSC_0002.jpg
http://i247.photobucket.com/albums/gg134/greg_hoffner/ORE%20PICS/DSC_0001.jpg
http://i247.photobucket.com/albums/gg134/greg_hoffner/ORE%20PICS/DSC_0004.jpg
http://i247.photobucket.com/albums/gg134/greg_hoffner/ORE%20PICS/DSC_0005.jpg
http://i247.photobucket.com/albums/gg134/greg_hoffner/ORE%20PICS/DSC_0007.jpg
Hopefully these came out OK :blush2:
Body armor, front & rear panels,& sliders are all from ORE

is that armor all on your tires?:laughing::thefinger: j/k, my wife wishes my jeep was that clean when she has to drive it to work, while im at home sippin a :beer:

MOJAVEGREEN
06-11-2008, 12:56 AM
:grinpimp:btw, Puddlz has one of the coolest and cleanest jeepers garages ive ever seen! :grinpimp:

PUDDLZ
06-11-2008, 06:34 AM
no armor all AUSTIN OR MARK

Just got done HOSING her off, notice the wet ground.

MOJAVEGREEN
06-11-2008, 09:13 AM
we know! just rippin ya...:laughing::beer: