well i went out today with a buddy to shoot my buddys Springfield xd 45... and after that my buddy knew a few flexing spots.. so heres some shots of what i was doing just messing around...

i do notice i need LONGER ABS lines.. anyone know how to make these longer?

http://i296.photobucket.com/albums/mm190/jeepdice/today1.jpg
http://i296.photobucket.com/albums/mm190/jeepdice/today2.jpg
http://i296.photobucket.com/albums/mm190/jeepdice/today3.jpghttp://i296.photobucket.com/albums/mm190/jeepdice/today4.jpg
http://i296.photobucket.com/albums/mm190/jeepdice/today5.jpg

Man, that thing is really flexy...:smokin:

it could be even more flexy if i could get longer abs lines.. thats what holding me back right now...

You can re-route the front ABS lines to the inside of the frame rails and it'll free up alot of slack for ya.

Similar in the rear if needed, you can re-route them to gain some slack.

if you mean the wires, it's just 2 wires per wheel, I extended mine tonight.
cut 'em, solder and heat shrink in a few inches of wire and either redo the split loom or cut a piece a couple inches longer than your splice so it overlaps the factory loom and use small zip ties to connect the loom like hose clamps

AWESOME JEEP!!!:beer:

thank you.

what lift are you running great lookin jeep

what lift are you running great lookin jeep

im running the Teraflex 6" Longarm.